Table of Contents
Advertisement
Chapter 3 Basic Operation
Playing a Disc
- Continuous Play
In the continuous play mode, you can play the first selection or desired selection on your
disc.
Before playing a disc, turn on the amplifier and set the input selector to the CD player
position.
Playing the First Selection
CONTINUE
1
DISPLAY MODE
2 Mai
LINE OUT/
PHONE LEVEL
3
4
1
Press POWER.
If the indicator on the left side of the
CONTINUE button does not light up, press
CONTINUE.
+]2[3]4[s
6|7/alalo
11512) 13) 14) 15,
16] 17| 18 "19[20
2 Press &.
aN
OPEN'CLOSE
3
Place a disc with the printed side up on the
tray.
ree
za)
The disc tray closes to start playing the first
selection.
10
To stop play
To stop for a moment during play, press I.
Press Ef or B to resume play.
To stop play, press
To stop play and open the tray, press &.
To control the volume
When you use VARIABLE, adjust the volume with LINE
OUT/PHONE
LEVEL of the player or LINE OUT LEVEL of
the remote commander. Press + of the remote
commander to turn up the volume and press — to turn
down the volume. When you press + or —, LINE OUT/
PHONE LEVEL of the player rotates automatically.
When listening with headphones
Connect the headphones and adjust the volume with LINE
OUT/PHONE LEVEL or LINE OUT LEVEL of the remote
commander.
To play a 8 cm (3-inch) CD
Place it on the inner circle of the tray. If the disc is
provided with an adaptor, first remove it. Do not put a
normal CD (12 cm/5-inch) on to of a 8 cm CD.
Note on the TIMER switch
Leave the TIMER switch off when you are not using timer activated play. (For
further details, refer to page 38.)
What is this indication?
This indication appears when the tray is empty. The indication can be
changed to a customized indication. (page 32).
Advertisement
Table of Contents
