Table of Contents
Advertisement
Indexing a Disc
- custom index
A custom index is a special index that can be assigned to any position you want on the disc.
If you assign custom indexes to the positions on a disc, you can easily locate the positions
during play, or enjoy repeat play between two adjacent custom indexes.
Assigning Indexes to Your Disc
Numeric
Al
C INDEX
—e4
7"\\
1
Press C.INDEX during play.
The music calendar disappears.
mA
woe
custom
index.
2 Press FILE where you want to assign a
The index number flashes
play).
The 3-second portion from the point where you
pressed FILE is played repeatedly (rehearsal
>>.
second.
3 Adjust the repeat start point using <4 or
a
a
Press
to shift the repeat start point forward
and «#4 to shift it backward. Pressing <<4/>>
7 times shifts the point by approximately 1
Flashes
34
4
Press FILE to store the custom index. The
custom index is assigned to the repeat start
point.
Lights up.
1
CUSTOM FE
Jeony
|
Lights up.
5
You can assign custom indexes up to 10
positions by repeating steps from 2 to 4.
To release rehearsal play
Press CLEAR, to resume normal play.
If a new custom index is assigned to a position
preceding another index
Previously existing indexes will be shifted as follows.
Example: If you assign a new index between 2 and 3.
{1jl2]. [3
1|{2|[3][4
t
A new index
The old index 3 becomes 4
During custom index play
You cannot use the normal index search, however, search of custom index
function is possible.
If you press FILE in the pause mode
The rehearsal play is not made and the custom index is assigned
immediately at the position where FILE is pressed.
If you press the M.SCAN in the C.INDEX mode, the beginning of each
custom index is played.
Advertisement
Table of Contents
