Adjusting the Flow
UK
From the Home screen you
can adjust the flow during
showering, by moving the
lever left or right.*
FLOW FEEDBACK DISPLAY
MED
Flow
After adjusting the flow, the display will return to the temperature Home
screen after a few seconds.
Note: the change in flow will vary depending on the water system pressure
and the configuration of the pipework. For further information, refer to the
trouble shooting section and the Important Information section in the Smart
Shower Installation Guide.
Emergency Stop: When the flow setting is at ECO, joggle the lever
down 3 times in succession to turn the shower off.
*Flow cannot be adjusted when in Settings mode, or when the shower is awake and
not flowing.
8
MAX
Flow
39