Switching On And Off - Elisa Intuition User Manual

Switching On and Off

UK
STARTING YOUR SHOWER
To activate the controller, use the proximity sensor, or touch the power symbol
until the screen wakes up, then push and release the lever to start the shower. The
Get Ready screen will appear on the display. After a moment the target
temperature will flash until it is reached. It will then display the thermostatically
controlled temperature.
Hello
ENDING YOUR SHOWER
Touch the power symbol for approximately 1 second, then push the lever
when prompted, to confirm and end the shower.
39
The controller features a secondary method to turn the shower off.
This is done using the lever: joggle the lever down until the flow is set
to ECO, then joggle the lever down three more times in succession.
As a safety feature, the SmartValve has a maximum run time of 20
minutes. The flow can be stopped and started at any time by following
the instruction on this page.
This can be enhanced by activating and using the free Aqualisa app.
See pages 3 and 16 for details.
6
39
Push Lever
water turns on
Push lever
to power o
water turns off
Get
Ready
Your
shower was
9:20
39
Warming
Goodbye