Adjustable Head - Elisa Intuition User Manual

Adjustable Head

UK
Vita™ Head
To avoid water dripping from the shower head
after use, we advise to tilt the head back to allow
residual water to drain out.
The above recommendation applies to both
adjustable and fixed shower heads.
Rotate the spray plate lever clockwise or
anticlockwise to select the desired spray pattern.
To select the preferred height for the shower head,
squeeze the side levers together to allow the
handset holder to move up or down the rail.
Angular adjustment is made by carefully but firmly
pulling forwards or pushing back the shower head
against the ratchet in the holder.
Removing the shower head: with the hose still
attached, disengage the pivot clip by pushing
in the outer grey button located on the front of
the shower head (near to the hose connection).
Remove the spigot from the bottom of the handset
by using the hose to pull clear. To reattach: ensure
the hose washer is in the correct position, tighten
the threaded spigot into the hose using a suitable
spanner, taking care not to over-tighten. Reinsert
the spigot into the handset and engage the pivot
clip prior to placing the handset into the handset
holder.
10
1. Inner
2. Middle
3. Outer