AEG NIG85M30AB User Manual page 168

6.8 Keep Warm mode
This function keeps food warm with the low
temperature setting.
Keep Warm mode is available only when the
cooking zone is still warm after the finished
cooking process (with a visible residual heat
icon) and the cookware remains on the zone.
The function does not work with a cold
cooking zone.
1. Touch to activate the Keep Warm
mode.
The Keep Warm mode operates until turned
off.
2. To stop the function touch
left corner of the display.
You can set a timer, if needed. Refer to
"Timer options".
6.9 Timer options
ECO Timer
Use this function to specify how long a
cooking zone should operate during a single
cooking session.
To save energy, the heater of the cooking
zone deactivates before the ECO Timer
sounds. The difference in the operation time
depends on the heat setting level and the
length of the cooking operation.
You can use this function when the cooking
zone is activated. You can set the function for
each cooking zone separately.
1. Set the heat setting for the appropriate
cooking zone first and then set the
function.
2. Touch the zone symbol.
3. Touch .
The timer menu window appears on the
display.
4. Tick the Stop zone box to activate the
function.
5. Set the time.
6. Touch OK to confirm.
You can also choose
selection.
168 ENGLISH
in the upper
to cancel your
You can change the ECO Timer settings
during cooking: touch
value, then touch EDIT.
When the timer runs out, a signal sounds and
a pop-up window appears. Touch OK to stop
the signal.
To deactivate the function, set the heat
setting to 0. Alternatively, touch
timer value, touch
when a pop-up window appears.
Timer
You can use this function when the cooking
zone is activated.
The function has no effect on any other
function operating concurrently.
1. Select any cooking zone.
The relevant slider appears on the display.
2. Touch .
The timer menu window appears on the
display.
3. Untick the Stop zone box to activate the
function.
4. Set the time.
5. Touch OK to confirm.
You can also choose
selection.
You can change the Timer settings during
cooking: touch with the timer value, then
touch EDIT.
When the timer runs out, a signal sounds and
a pop-up window appears. Touch OK to stop
the signal.
To deactivate the function touch
timer value, touch
when a pop-up window appears.
6.10 / Bridge
This function connects two cooking zones
and they operate as one with the same heat
setting. You can use it to cook with large
cookware.
Cookware must cover the centres of both
zones. If the cookware is located between the
two centres, the function will not be activated.
with the timer
with the
and confirm your choice
to cancel your
with the
and confirm your choice