Daily Use - AEG NIG85M30AB User Manual

6. DAILY USE

WARNING!
Refer to Safety chapters.
6.1 Activating and deactivating
Touch for 1 second to activate or
deactivate the hob.
6.2 Automatic Switch Off
The function deactivates the hob
automatically if:
• all cooking zones are deactivated,
• you do not set the heat setting after you
activate the hob,
• you spill or put something on the control
panel for more than 10 seconds (a pan, a
cloth, etc.). An acoustic signal sounds and
the hob deactivates. Remove the object or
clean the control panel.
• the hob gets too hot (e.g. when a
saucepan boils dry). Let the cooking zone
cool down before you use the hob again.
• you use incorrect cookware or there is no
cookware on a given zone. The induction
cooking zone deactivates automatically
after 50 seconds.
• you do not deactivate a cooking zone or
change the heat setting. After some time a
message comes on and the hob
deactivates.
The relation between the heat setting and
the time after which the hob deactivates:
Heat setting
1 - 2
3 - 5
6
7 - 9
When you use Pan-frying the hob
deactivates after 1.5 hours. For Melting
the hob deactivates after 6 hours.
166 ENGLISH
The hob deactivates
after
6 hours
5 hours
4 hours
1.5 hour
6.3 Pot detection
This feature detects if pots were placed on
the cooking zones and deactivates the
cooking zones if the cookware is no longer
detectable.
• If you put cookware on a cooking zone
first and then activate the hob, a grey bar
appears on the overview of the
corresponding cooking zone.
• The bar will not appear if there is no
cookware on the cooking zone or the
cookware cannot be detected due to its
incorrect placement or unsuitable material.
• If you remove the cookware from an
activated cooking zone and set it aside
temporarily, the corresponding cooking
zone overview will start blinking. If you do
not place the cookware back on the
activated cooking zone within 120
seconds, the cooking zone will
automatically deactivate. To resume
cooking, make sure to put the cookware
back on the cooking zones before the
indicated timeout.
6.4 Using the cooking zones
Induction cooking zones adapt to the
dimensions of the bottom of the cookware
automatically.
Make sure that the cookware is suitable
for induction hobs. For more information
on cookware types refer to "Hints and
tips". Check the size of the cookware in
"Technical data".
To activate the cooking zone place the
cookware in the centre of the cooking zone
and touch the relevant zone symbol. The
available programs appear on the display.
Set the heat level or select one of the
automatic functions. To get back to the main
view touch in the top right corner.
You can cook with large cookware placed on
two cooking zones at the same time using
Bridge.