Table of Contents
Advertisement
Do not set temperature too high for the material. When temperature is too high the material
will turn into a liquid. This liquid can come out of the nozzle and might cause burns. When
you go even higher the material will decompose and the extrusion process will not be able to
be continued. Make sure you know the specific melting temperature and decomposition
temperature of the material you are using.
Do not touch hot parts, as there is a potential risk of burns, the nozzle can reach a
temperature up to 450 degrees Celsius. The remaining parts can reach a temperature of 100
degrees Celsius.
⚠
WARNING
⚠
WARNING
3
Advertisement
Table of Contents
