Table of Contents
Advertisement
1)
Place the Filament Maker on a flat and stable surface. Ensure the working
station is free from liquids.
⚠
2)
Check that the voltage in your working station corresponds to the
purchased product. Do not operate with a different cord or plug, if it is not
working properly, or if it has been damaged.
3)
Make sure the power button is in the 'OFF' position and plug the power
cable into the filament maker. Plug the other end of the cable in a
grounded outlet.
4)
Switch the power button in the ON position.
3.
INSTALLATION
14
Advertisement
Table of Contents
