The manufacturer is not liable for any problems caused by the user's failure to
observe these instructions. Read the instructions below and safe this document for
future questions.
Place the filament maker on a flat and stable surface.
•
Do not use the machine if it is not compatible with the mains electricity in
•
your country. Consult the sticker on the machine.
Only lift if you are sure you are capable; the machine is heavy.
•
Ask for help or use tools when moving.
Use the filament maker in a ventilated area and preferable in a working
•
temperature of 20 degrees Celsius. Area should not be too bright, the light
could interfere with the optical sensor.
Minimum age for use of the filament maker is age 18.
•
Do NOT put your hands into the extrusion area when the filament maker
•
is in use.
Maintenance and repair by certified workers only. Please contact 3devo or
•
reseller.
The filament maker has been extensively tested, but if a failure occurs
•
please contact us via support.3devo.com.
1.
SAFETY INSTRUCTIONS
1