4.3. STATUS TYPES
The highlighted area tells you the current status of the extruder. The following
status types may occur during operation:
Status type
Idle
Homing positioner
Heating
Prepared
Running
Error
Information
Initial startup state of the extruder
Resets the positioner to a known state before use.
Heats up the barrel to the set temperatures after the
positioner homing is completed
Only shown when the 'manual start' option is used.
The extruder is on temperature and ready to start
until the timeout of X minutes is reached.
The heaters have reached their set point, the extruder
motor is started.
Only shown when an error has occurred before or
during the extrusion process.
18