4.10. ABOUT THIS MACHINE
Information about the extruder, mostly useful for support and maintenance of the
extruder. The information shown are as following:
Setting name
Serial
Production date
Software version
Motor hours
More details (button)
EEPROM version
Factory info version
Devoboard version
Interfaceboard version
4.11. RUNNING MENU
Information
The serial number given to the extruder at 3devo.
This is the same serial number on the sticker
filament maker to the power switch of the filament
maker.
Extruder assembly date.
The software version of the software which is
installed by the manufacturer or user.
Amount of running state hours.
Opens the hardware version section of the 'About
this machine' menu.
EEPROM settings version
Extruder hardware version
Main board version
Display board version
The Main menu has extra options available
while the machine is running. Summarized
these options are; Stop extruding, Modify
settings, use the 'Speed tuning' menu to
edit the puller speed and start spooling.
The following chapters explains more about
the menu's while the extruder is in the
running state.
24