Setting The On / Off Timer - Samsung PE43H4000A Manual

Setting the On / Off Timer

O
MENUm → System → Time → On Timer <or> Off Timer → ENTERE
• On Timer: You can set up three separate On Timer configurations. (On Timer 1, On Timer 2, On Timer 3)
Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at your convenience. If you
select Manual, you can set up the day you want to activate the timer.
✎
The c mark indicates the day you've selected.
Time: Set the hour and minute.
Volume: Set the desired volume level.
Source: To select the source of the content that will play when the TV turns on. You can:
− Select TV and have the TV display a specific air or cable channel.
− Select USB and have the TV play back photo or audio files from a USB device.
− Select a source on your TV that you have connected a set-top box to, and have the TV display a channel from
the set-top box.
✎
The USB device must be connected to your TV before you can select USB.
✎
If you select a source other than TV or USB, you must:
• Have a cable or satellite set-top box attached to that source
• Set the set-top box to the channel you want to watch when the TV goes on
• Leave the set-top box turned on.
✎
When you select a source other than TV or USB, the Aerial and Channel options will disappear.
Aerial (when the Source is set to TV): Select ATV or DTV.
•
• Channel (when the Source is set to TV): Select the desired channel.
Music / Photo (when the Source is set to USB): Select a folder in the USB device containing music or photo files to
•
be played when the TV is turned on automatically.
− If there is no music file on the USB device or the folder containing a music file is not selected, the timer function
does not operate correctly.
− When there is only one photo file in the USB device, the slide show will not play.
− If a folder name is too long, the folder cannot be selected.
− Each USB you use is assigned its own folder. When using more than one of the same type of USB, make sure
the folders assigned to each USB have different names.
− It is recommended that you use a USB memory stick and a multi card reader when using On Timer.
− The On Timer function may not work with USB devices with a built-in battery, MP3 players, or PMPs made by
some manufacturers because these devices take a long time to be recognized.
• Off Timer: You can set up three separate Off Timer configurations. (Off Timer 1, Off Timer 2, Off Timer 3)
Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at your convenience. If you
select Manual, you can set up the day you want to activate the timer.
✎
The c mark indicates the day you've selected.
Time: Set the hour and minute.
[PH4000-RU]BN68-05792L-00L04.indb 25
English - 25
2014-02-03 7:22:02