Preference Features; Executing Initial Setup; Setting The Time; Using The Sleep Timer - Samsung 4+ Series User Manual

Preference Features

System Menu

Executing initial setup

¦
Setup
O
MENUm → System → Setup → ENTERE
Configure the channels and the time when setting up the TV
for the first time or when resetting the unit.

Setting the Time

¦
Time
O
MENUm → System → Time → ENTERE
The current time will appear every time you press the
button.
■
Clock: Setting the clock is for using various timer
features of the TV.
✎
If you disconnect the power cord, you have to set
the clock again.
Clock Mode: Set up the current time manually or
automatically.
–
Auto: Set the current time automatically using the
time from a digital channel.
✎
The aerial must be connected in order to set the
time automatically.
–
Manual: Set the current time manually.
✎
Depending on the broadcast station and signal, the
auto time set up may not be correct. In this case,
set the time manually.
Clock Set: Set the Date and Time.
✎
Available only when Clock Mode is set to Manual.
✎
You can set the Date and Time directly by pressing
the number buttons on the remote control.
Time Zone (depending on the country): Select your time
zone.
✎
This function is only available when the Clock
Mode is set to Auto.

Using the Sleep Timer

¦
O
MENUm → System → Time → Sleep Timer →
ENTERE
■
Sleep Timer t: Automatically shuts off the TV
after a preset period of time. (30, 60, 90, 120, 150 and
180 minutes).
✎
To cancel Sleep Timer, select Off.

Setting the On / Off Timer

¦
O
MENUm → System → Time → On Timer <or> Off
Timer → ENTERE
■
On Timer 1 / On Timer 2 / On Timer 3: Three different
on timer settings can be made. You must set the clock
first.
–
Setup: Select Off, Once, Everyday, Mon~Fri,
Mon~Sat, Sat~Sun or Manual to set at your
convenience. If you select Manual, you can set up
the day you want to activate the timer.
✎
The c mark indicates the day you've
selected.
–
Time: Set the hour and minute.
–
Volume: Set the desired volume level.
–
Source: Select TV or USB content to be played
INFO
when the TV is turned on automatically. (USB can be
selected only when a USB device is connected to the
TV)
–
Aerial (when the Source is set to TV): Select ATV or
DTV.
–
Channel (when the Source is set to TV): Select the
desired channel.
–
Music / Photo (when the Source is set to USB):
Select a folder in the USB device containing music
or photo files to be played when the TV is turned on
automatically.
✎
NOTE
• If there is no music file on the USB device
• When there is only one photo file in the
• If a folder name is too long, the folder
• Each USB you use is assigned its own
• It is recommended that you use a USB
• The On Timer function may not work
or the folder containing a music file is
not selected, the timer function does not
operate correctly.
USB device, the slide show will not play.
cannot be selected.
folder. When using more than one of the
same type of USB, make sure the folders
assigned to each USB have different
names.
memory stick and a multi card reader when
using On Timer.
with USB devices with a built-in battery,
MP3 players, or PMPs made by some
manufacturers because these devices take
a long time to be recognized.
17
English