Selecting The Sound Mode - Samsung PE43H4000A Manual

Additional Settings
O
MENUm → Sound → Additional Settings → ENTERE
DTV Audio Level (digital channels only): This function allows you to reduce the disparity of a voice signal (which is
•
one of the signals received during a digital TV broadcast) to a desired level.
✎
According to the type of broadcast signal, MPEG / HE-AAC can be adjusted between -10dB and 0dB.
✎ To increase or decrease the volume, adjust between the range 0 and -10 respectively.
• Dolby Digital Comp: This function minimizes signal disparity between a dolby digital signal and a voice signal (i.e.
MPEG Audio, HE-AAC, ATV Sound).
✎ Select Line to obtain dynamic sound, and RF to reduce the difference between loud and soft sounds at night
time.
Line: Set the output level for signals greater or less than -31dB (reference) to either -20dB or -31dB.
RF: Set the output level for signals greater or less than -20dB (reference) to either -10dB or -20dB.
Reset Sound
O
MENUm → Sound → Reset Sound → ENTERE
Reset all sound settings to the factory defaults.
Selecting the Sound Mode t
When you set to Dual I-II, the current sound mode is displayed on the screen.
A2 Stereo
NICAM Stereo
✎
If the stereo signal is weak and an automatic switching, occurs, then switch to the mono.
✎
Only activated in stereo sound signal.
✎
Only available when the Source is set to TV.
[PH4000-RU]BN68-05792L-00L04.indb 23
Audio Type
Mono
Stereo
Dual
Mono
Stereo
Dual
English - 23
Dual I-II
Mono
Stereo ↔ Mono
Dual I ↔ Dual II
Mono
Mono ↔ Stereo
Mono → Dual I
 Dual II 
Default
Automatic change
Dual I
Automatic change
Dual I
2014-02-03 7:22:01