Setting the Setup
MENUm → System → Setup → ENTERE
Configure the channels and the time when setting up the TV
for the first time or when resetting the unit.
For the detailed information about setting Setup, refer
to "Setup (Initial Setup)" in User Manual.
Enter your 4-digit PIN, the default of which is 0-0-0-0.
Setting the Time
MENUm → System → Time → ENTERE
The current time will appear every time you press the
Clock: Setting the clock is for using various timer
features of the TV.
If you disconnect the power cord, you have to set
the clock again.
Clock Mode: Set up the current time manually or
- Auto: Set the current time automatically using the time
from a digital channel.
The antenna must be connected in order to set the
- Manual: Set the current time manually.
Depending on the broadcast station and signal, the
auto time set up may not be correct. In this case,
set the time manually.
Clock Set: Set the Date and Time.
Available only when Clock Mode is set to Manual.
You can set the Date and Time directly by pressing
the number buttons on the remote control.
Time Zone (for Brazil, Chile, Ecuador) : Select your time
This function is only available when the Clock
Mode is set to Auto.
Using the Sleep Timer
MENUm → System → Time → Sleep Timer →
Sleep Timer t: Automatically shuts off the TV
after a preset period of time. (30, 60, 90, 120, 150 and
To cancel Sleep Timer, select Off.
Setting the On / Off Timer
MENUm → System → Time → On Timer <or> Off
Timer → ENTERE
On Timer: Three different on timer settings can be
made. You must set the clock first.
Setup: Select Off, Once, Everyday, Mon~Fri,
Mon~Sat, Sat~Sun or Manual to set at your
convenience. If you select Manual, you can set up the
day you want to activate the timer.
The c mark indicates the day you've selected.
Time: Set the hour, minute, am/pm.
Volume: Set the desired volume level.
On Timer 1