Preference Features
System Menu
Executing initial setup
Setup
O
MENUm → System → Setup → ENTERE
Configure the channels and the time when setting up the TV for the first time or when resetting the unit.
✎
Execute the initial setup following instructions that the TV guides.
Setting the Time
Time
O
MENUm → System → Time → ENTERE
The current time will appear every time you press the
Clock: Setting the clock is for using various timer features of the TV.
•
✎
If you disconnect the power cord, you have to set the clock again.
Clock Mode: Set up the current time manually or automatically.
− Auto: Set the current time automatically using the time from a digital channel.
✎
The aerial must be connected in order to set the time automatically.
− Manual: Set the current time manually.
✎
Depending on the broadcast station and signal, the auto time set up may not be correct. In this case, set the
time manually.
Clock Set: Set the Date and Time.
✎
Available only when Clock Mode is set to Manual.
✎
You can set the Date and Time directly by pressing the number buttons on the remote control.
Time Zone (depending on the country): Select your time zone.
✎
This function is only available when the Clock Mode is set to Auto.
✎
When selecting Manual in Time Zone, GMT and DST will be activated.
Using the Sleep Timer
O
MENUm → System → Time → Sleep Timer → ENTERE
•
Sleep Timer t: Automatically shuts off the TV after a preset period of time. (30, 60, 90, 120, 150 and 180
minutes)
✎
Use the ▲ / ▼ buttons to select a period of time, and then press ENTERE. To cancel the Sleep Timer,
select Off.
[PH4000-RU]BN68-05792L-00L04.indb 24
INFO
button.
English - 24
2014-02-03
7:22:01