Basic Procedure - Roland RD-600 Owner's Manual

TX LOWER PART TX UPPER PART
Sound Module A Sound Module B
DoE ey
LOWERHEE-UPPER == LOWER-IRSHUPPER
ACK DECAY RELEASE BRIGH Ta!
PART SWITCH/LEVEL
INT LOWER PART INT UPPER PART
Local part settings
Basic procedure
PART SELECT feigfoyeizg
EDIT LOWER CS 9 Ca LN C= CS A r SETUP B
LO@
INTERNAL TONE CATEGORY
£,PIANO, ORGAN STRINGS PAD BASS/LEAD CLAV/MALLET
See
<@ PAGE >»
DEC/NO INC/YES
INTERNAL TONE VARIATION
1.Press the [EDIT] button to make the indicator light, and you will enter Edit mode
2. Select the local part that you wish to modify.
Press a part select button to make the indicator light, and your selection will appear in the dis-
play.
3. Use the PAGE [ < ][ > ] buttons to select the parameter that you wish to adjust.
Select a parameter prefixed by a "L" character. The setting value is displayed below the para-
meter name.
* By holding down the PAGE | » J (| < ]) button and pressing the PAGE [ «] ([ = ]) button you can
move rapidly in the [ = ] ({ ~ ]) direction.
Parameter
Setting group [LF art As=2iarn
THT UrPart 1
Selected focal part
4. Press the [INC/ YES] [DEC/NO] buttons to modify the value of the setting
* By holding down the [INC/YES] (IDEC/NO]) button and pressing the [DEC/NO] ([INC/YES]) but-
ton you can increase (decrease) the value rapidly.
5. Repeat steps 3-4 as necessary.
6.When you are finished, press the [EDIT] button to make the indicator go dark. You will return
to normal playing condition.
39