Tone Parameters - Roland RD-600 Owner's Manual

DR TET TT POSEN SPI Tt SITTIN TIN EE oT
4. Select the Tone that you wish to modify.
Press the Group /Category / Variation buttons to make the indicators light, and the name of the
selected Tone will appear in the display.
If you have selected one of the TX parts, the Group / Category / Variation will be displayed.
5.Press the [INC/ YES] [DEC/NO] buttons to modify the value of the setting.
* By holding down the [INC/YES] ([DEC/NO]) button and pressing the [DEC/NO] ([INC/YES]) but-
fon you can rapidly increment (decrement) the value.
6. As necessary, repeat steps 2-5.
7.When you are finished, press the [EDIT] button to make the indicator go dark. You will return
to the normal playing mode.
Tone parameters
Tone settings include the following parameters.
Tone parameters for an INT part Tone parameters for a TX part
Pan Pan
Coarse Tune Coarse Tune
Fine Tune Fine Tune
Reverb Amount Reverb Amount
Chorus Amount Chorus Amount
Bend Range Up Bend Range
BendRangeDown
EFX
EFX Level
Setting the stereo location (Pan)
Pan determines the location of the sound when you are listening in stereo.
For example you might want to adjust this setting to place the drum set and bass in the center,
the guitar at the right, and the keyboard at the left.
Pressing the [INC/YES] button will move the sound toward the right, and pressing the
[DEC/ NO] button will move the sound toward the left.
If a TX part Tone is selected, you can simultaneously press the [INC/ YES] [DEC/NO] buttons
to turn the setting OFF, so that Pan messages will no longer be transmitted from MIDI OUT. To
restore the original setting, press the [INC/ YES] or [DEC/ NO] button.
* For some Tones, slight leakage of sound may be heard from the opposite speaker even with a setting of
fully left (or right). Also in some cases, the result of this setting may be difficult to notice.
* If you are listening to the RD-600 in monaural, the pan setting will have no effect.
TP ar ah Range of values: INT: L64—63R, TX: OFF, L64-63R
Sh.Cornmcert le &
Setting the amount of transposition (Coarse Tune)
This setting transposes the pitch of the sound in semitone steps. Pressing the [INC/ YES] button
will raise the key (pitch), and pressing the [DEC/NO] button will lower the key (pitch).
If a TX part Tone is selected, you can simultaneously press the [INC/YES] [DEC/NO] buttons
to turn the setting OFF, so that Coarse Tune messages will no longer be transmitted from MIDI
OUT. To restore the original setting, press the [INC/ YES] or [DEC/NO] button.
* This has no effect when a Rhythm Set (B86, B87, B88) is selected.
ee Range of values: INT: -48- +48, TX: OFF, -48- +48
SL. Concert le &
32