Advertisement
Mounting
1. Take OFF the power.
2. Put on the controller on the wall or a roller box.
3. 3. Connect power cable to terminals 1-2 with marks.
Group of controllers which working with common cen-
tral control should be supplied from the same phase e.g
only L1.
4. Choose control option (control impulse L or N). Switch of local
control and central control connect with marks with function
to terminal to choosen cable (accordance with choosen con-
trol option – L or N).
All control inputs of controllers which works separately
or in group should have to common control impulse
option – all are controlling from the same phase, e.g.
only L1; or all from N.
Choosing control option from phase (L) to control inputs
should be connect to the same phase as for supply e.g.
only phase L1.
Connection different phase e.g. L1 and L2; or phase L
and "zero" N to inputs of control inputs of controller can
cause to wrong work of system and break controllers.
- 5 -
Advertisement
