Indoor Unit Control Panel - Beko BFYTI 360 Installation Manual

6

Indoor unit control panel

Swing
1
Temp down
3
No. Button
1 Swing
2 Fan
3 Temp-
4 Temp+
5 Mode
6 On/Off
7 Composite button
Warning:
A
The shape and position of the emergency button may be different
according to the model, but their function is the same.
C
Note:
The external static pressure of heat pumps is 0 Pa for all models.
16 / EN
Fan Temp-
2
3
Temp up Fan
4 2
Function
To activate or deactivate of the movement of the "Flaps" and deflectors.
To select the fan speed of auto/low/mid/high
Decrease the temperature or time by 1 unit
Increase the temperature or time by 1 unit
To select the mode of operation
To switch the conditioner on and off.
Keep pressing the Swing button on the control panel for 3 seconds (two
beeps), then press the button "Temp up" activates the "flaps" the air flow
is directed from up to down and press the button "Temp down" activates
the "deflectors" the air flow is directed from rightward or leftward.
Floor standing air conditioner / Installation Manual
Temp+ Mode
4 5
Swing Mode
1 5
On/O
6
6