Toro 4045 Installation Instructions page 4

Figure 6
1. Bolt (M12-1 3/4 x 120 mm) 4. Upper bracket, large
2. Bolt (M8-1 1/4 x 30 mm)
3. Upper bracket, small
3. Torque the M8 bolts to 23 to 29 N-m (17 to 21 ft-lb).
4. Torque the M12 bolts to 80 to 100 N-m (59 to 73 ft-lb).
5. Install the lower bracket using 2 bolts (M8-1 1/4 x 30
mm) and 2 locknuts (M8) as shown in
Figure 7
1. Lower bracket
2. Locknuts (M8)
6. Torque the M8 bolts to 23 to 29 N-m (17 to 21 ft-lb).
5. Locknut (M8)
6. Locknut (M12)
Figure 7.
3. Bolts (M8-1 1/4 x 30 mm)
3
Installing the Stakedown
Guard
Parts needed for this procedure:
1 Stakedown guard
8
Bolt (M8-1 1/4 x 30 mm)
8 Locknut (M8)
Procedure
Rotate the hydraulic lines as needed to ensure that they
do not rub on the stakedown guard assemblies.
Install the stakedown guard using 8 bolts (M8-1 1/4 x 25 mm)
and 8 locknuts (M8) as shown in
Torque the bolts to 23 to 29 N-m (17 to 21 ft-lb).
4
Figure 8.
Figure 8