Integra PLA-50FP1 Manual page 129

48. Mount the terminal panel VIDEO M59 assembly by means of the
six screws SRW03 and the two screws SRW10.
(Caution) Tighten the round terminal CN (an earth wire used to
connect the PDP module and the terminal panel VIDEO)
by means of the screws SRW03.
49. Mount the round terminal of the connector AD with the screws
SRW16.
50. Mount the terminal panel 232C M60 assembly with the four screws
SRW15.
51. Mount the bracket option M44 with the three screws SRW34.
52. Mount the three edge saddles M06 and the thirteen lead clampers
M02.
TOP
SRW03 x 6
M44
SRW34 x 2
CN SRW16
AD
M06 x 3
SRW10 x 4
M02 x 13
SRW10 x 2
M59
M60
14