Integra PLA-50FP1 Manual page 119

17. Put the frames M27 and M28 on the PDP module P01, and put the
brackets M32 and M33 and the frames M34, M35, and M45 on
them. Mount them, using 8, 9, 2, 4, and 2 screws SRW04, 05, 06,
07, and 08, respectively.
In addition, mount the frames M27 and M28, using every four
screws SRW03.
18. Insert the PD cable CN-PD and the PH cable CN-PH respectively
in the connectors CN105 and CN104 of the PDP module.
SRW07 x 4
M27
M32
CN-PH
M45
SRW04 x 8
SRW08 x 2
M28
M35
SRW03 x 4 x 2
M33
CN-PD
P0
M34
SRW06 x 2
SRW05 x 9
TOP
4