Integra PLA-50FP1 Manual page 126

33. Mount the inlet cover M63 on the inlet ASSY, using the two screws SRW27.
34. Stick the gasket M20 to the inlet cover.
SRW26
M63
M20
35. * For PX-50XM1
Attach one each of the ferrite cores FL30 and FL31 to the blue and brown
cables of the inlet ASSY.
In addition, attach a green cable (GND) to each of the two ferrite cores FL32
and FL34; each cable wound by two turns.
* For PX-50XM1A,G
Bundle three cables (each in blue, brown, and green) of the inlet ASSY and
mount one each of the ferrite cores FL30 and FL31.
In addition, attach a green cable (GND) to each of the two ferrite cores FL32
and FL34; each cable wound by two turns.
(Caution) These two ferrite cores A are purchased from a parts manufacturer
under the condition that they are already mounted on the inlet
36. Mount the GND terminal of the inlet ASSY by means of the screw SRW26.
FL30,31
SRW27 x 2
FL32,34
GND
PX-50XM1
ASSY.
FL30,31
FL32,34
A
GND
SRW2
PX-50XM1A,G,GS
11