Lexmark ST9820 User Manual page 33

Understanding the printer menus
Setup
Menu item
Printer Language
PCL Emulation*
PS Emulation
Resource Save
Off*
On
Print All Order
Alphabetical*
Oldest First
Newest First
Note: An asterisk (*) next to a value indicates the factory default setting.
Quality
Menu item
Print Resolution
600 dpi*
1200 Image Q
2400 Image Q
1200 dpi
300 dpi
Pixel Boost
Off*
Fonts
Horizontally
Vertically
Both directions
Toner Darkness
1–10 (8*)
Halftone
Normal*
Detail
Brightness
‑6 to 6 (0*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the printer language.
Note: Setting a default printer language does not prevent a software
program from sending print jobs that use another printer language.
Set the printer to handle temporary downloads when it receives a job that
requires more than the available memory.
Notes:
•
Off sets the printer to retain downloads only until memory is needed.
Downloads are deleted to process print jobs.
• When set to On and the printer runs out of memory, a Memory
Full [38] appears on the display but downloads are not deleted.
Specify the order in which held and confidential jobs are printed when Print
All is selected.
Description
Set the resolution for the text and images on the printed output.
Note: Resolution is determined in dots per inch or image quality.
Enable more pixels to print in clusters for clarity, in order to enhance text and
images.
Determine the lightness or darkness of text images.
Enhance the printed output to have smoother lines with sharper edges.
Adjust the brightness of the printed output.
32