Printer Configurations - Lexmark ST9820 User Manual

Learning about the printer
1 Top
2 Rear
3 Right side 110 mm (4.33 in.)
4 Front
5 Left side
Printer configurations
CAUTION—TIPPING HAZARD: Installing one or more options on your printer or MFP may require a
caster base, furniture, or other feature to prevent instability causing possible injury. For more information
on supported configurations, contact the place where you purchased the printer.
CAUTION—TIPPING HAZARD: To reduce the risk of equipment instability, load each tray separately.
Keep all other trays closed until needed.
You can configure your printer by adding optional 250‑ or 550‑sheet trays. For more information, see
optional trays" on page
1 Control panel
2 Standard bin
3 Controller board access cover
4 Standard 250‑ or 550‑sheet tray
Note: The standard tray may vary depending on your printer model.
305 mm (12 in.)
100 mm (3.94 in.)
305 mm (12 in.)
Note: The minimum space needed in front of the printer is 75 mm (3 in.)
65 mm (2.56 in.)
126.
9
"Installing