Remove The 2280 Solid-State Drive (For Selected Models) - Lenovo ThinkBook 14 Gen 6 Hardware Maintenance Manual

Hide thumbs Also See for ThinkBook 14 Gen 6:
Table of Contents

Advertisement

Figure 10. Remove the 2242 solid-state drive bracket
Screw specifications
M2 × L3
Go to
https://support.lenovo.com/partslookup
replacement part:
2242 solid-state drive
2242 solid-state drive bracket
2242 solid-state drive thermal pad

Remove the 2280 solid-state drive (for selected models)

Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 28
Step 1.
Disconnect the battery pack cable from the system board. Then, remove one screw and remove
the 2280 solid-state drive by pulling it away from the slot.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable.
34
Lenovo ThinkBook 14 Gen 6 and Lenovo ThinkBook 14 Gen 6 Hardware Maintenance Manual
Number of screws
1
to look up the Lenovo part numbers of the following

Advertisement

Table of Contents
loading

Table of Contents