Screw specifications
M2 × L4
Go to
https://support.lenovo.com/partslookup
replacement part:
Lower case
Remove the battery pack
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 28
Step 1.
Disconnect the cable from the system board. Then, remove five screws and then remove the
battery pack.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable.
Note: The actual battery pack may look different from the photo.
Figure 4. Remove the battery pack
Screw specifications
M2 × L4
Go to
https://support.lenovo.com/partslookup
replacement part:
Battery pack
Remove the battery protective sponge
Make sure the following FRUs (or CRUs) have been removed.
Number of screws
4
to look up the Lenovo part numbers of the following
Number of screws
5
to look up the Lenovo part numbers of the following
.
Chapter 4
Removing a FRU or CRU
29