Advertisement
Quick Links
Instructions - Parts List
Hydraulic-Operated Bulk
Oil Transfer Packages
For dispensing non-corrosive and non-abrasive oils and lubricants only. For professional
use only.
Not approved for use in European explosive atmosphere locations.
Model Number 244632
®
1:1 Dyna-Star
Wall Mount
1500 psi (1.2 MPa, 12 bar) Maximum Air Inlet Pressure
1500 psi (3.7 MPa, 37 bar) Maximum Fluid Working
Pressure
Model Number 244634
1:1 Power-Star Wall Mount
1500 psi (1.2 MPa, 12 bar) Maximum Air Inlet Pressure
1500 psi (3.7 MPa, 37 bar) Maximum Fluid Working
Pressure
Important Safety Instructions
For complete warnings refer to the
Operating and/or Repair manual Dyna-Star
Hydraulic Reciprocator and Pump,
Dyna-Star 1/4:1 Ratio Universal Pump and
Reciprocator, and Power-Star.
Related Manuals
Manual in
Description
English
308155
Dyna-Star Hydraulic Reciprocator and Pump
308391
Power-Star
308394
Pump Mounting Bracket
308395
Hydraulic Fluid Controls
309352C
EN
Advertisement
Related Manuals for Graco 244632
Summary of Contents for Graco 244632
- Page 1 309352C For dispensing non-corrosive and non-abrasive oils and lubricants only. For professional use only. Not approved for use in European explosive atmosphere locations. Model Number 244632 ® 1:1 Dyna-Star Wall Mount 1500 psi (1.2 MPa, 12 bar) Maximum Air Inlet Pressure 1500 psi (3.7 MPa, 37 bar) Maximum Fluid Working...
- Page 2 Parts Parts Model No. 244632 (includes 1 - 5, 7) Model No. 244634 (includes 1 - 5, 7) Ref. Part Description Qty. Ref. Part Description Qty. 236864 CONTROLS, hydraulic fluid, (used 224741 PUMP, 1:1 Dyna-Star (used on on model 244632; refer to model 244632;...
- Page 3 Recycling and Disposal Recycling and Disposal End of Product Life At the end of the product’s useful life, dismantle and recycle it in a responsible manner. • Perform the Pressure Relief Procedure in your pump manual. • Drain and dispose of fluids according to applicable regulations.
- Page 4 With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective.