Dolphin BC633S Installation And Maintenance Manual

Electrnic soap dispenser

Advertisement

Quick Links

BC633
DOLPHIN ELECTRONIC
SOAP DISPENSER
I N S TA L L AT I O N A N D M A I N T E N A N C E G U I D E
October 2020

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BC633S and is the answer not in the manual?

Questions and answers

Summary of Contents for Dolphin BC633S

  • Page 1 BC633 DOLPHIN ELECTRONIC SOAP DISPENSER I N S TA L L AT I O N A N D M A I N T E N A N C E G U I D E October 2020...
  • Page 2 INDEX Technical Data Pre-Installation Info Pack Contents Installation Filling The Soap Tank Settings Adjustment Battery Replacement Spare Parts List Maintenance Limited Warranty Trouble Shooting Dolphin Blue BC633 Series...
  • Page 3: Technical Data

    IP 67 Battery Box for 6xD Alkaline batteries Battery models: 9V transformer or 12V transformer Mains models: 100 – 3800 cPs Soap viscosity: 1.4cc, Adjustable Standard discharge: 30-100 mm +/- 10 mm (Adjustable by remote control) Sensor range: BC633 Series Dolphin Blue...
  • Page 4 BC633F Dolphin Blue BC633 Series...
  • Page 5: Pre-Installation Information

    1.5 metres between the soap dispenser and any other objects. IMPORTANT: Keep in mind that the location of the user hands, while using the tap nearby should not interfere with the soap dispenser sensor detection area. Correct Installation Incorrect installation BC633 Series Dolphin Blue...
  • Page 6: Pack Contents

    Familiarise yourself with the part names and confirm that the parts are included. 1 x soap tank with bottle support and pump assembly 1 x body and fixing accessories 1 x IP 67 battery box for 6xd alkaline batteries \ transformer Dolphin Blue BC633 Series...
  • Page 7: Installation

    Place the soap dispenser body along with the bottom ring into the hole in the deck or lavatory. Under the deck, slide the gasket, disk and nut over the soap dispenser body nipple and secure it firmly BC633 Series Dolphin Blue...
  • Page 8 (Marked B) that is located at the end of the tube of the soap dispenser body. Step 3 – connecting the power source Remove the protective sticker covering the sensor. Keep away from the sensor range. Dolphin Blue BC633 Series...
  • Page 9 2b For transformer versions: plug the transformer into the electricity socket and connect the transformer connector Wait about 10 seconds before you put your hands within the sensor range. BC633 Series Dolphin Blue...
  • Page 10: Filling The Soap Tank

    Refill function. NOTE: Once the soap in the soap tank has reached the bottom line the soap tank should be refilled. To refill the soap tank please refer to steps 1-5. Dolphin Blue BC633 Series...
  • Page 11 Once the soap tank has been refiled, press the FILL button. The pump would work for one minute in order for the soap to start coming out of the soap dispenser spout. To stop this activity press the FILL button again. BC633 Series Dolphin Blue...
  • Page 12: Battery Replacement

    NOTE: Do not mix used batteries with new ones. 4. Close the box. Important: Spent batteries should not be disposed of with normal household waste. Contact your local authority for information on waste disposal and recycling. Dolphin Blue BC633 Series...
  • Page 13: Spare Parts List

    SPARE PARTS LIST Sensor for BC633 BC07220250 Soap bottle 1L BC07100020 12V Transformer BC06522086 Soap dispenser pump assembly BC07222028 Remote control BC07100008 IP 67 Battery Box for 6xD Alkaline batteries BC06530041 Bottle support 1 litre BC07120175 BC633 Series Dolphin Blue...
  • Page 14: Maintenance

    For surface cleaning use ONLY soap and water, then wipe dry with a clean cloth or towel. When cleaning bathroom tiles, the soap dispenser should be protected from any splattering of harsh cleansers. Dolphin Blue BC633 Series...
  • Page 15: Limited Warranty

    If a defect is found in normal use, Dolphin Solutions will, at its discretion, repair, provide a replacement part or product, or make appropriate adjustments. Damage caused by accident, misuse, or abuse is not covered by this warranty.
  • Page 16: Troubleshooting

    50/60C and run the pump constantly. Soap coming Connect the connectors out from the The connectors between the motor and the properly so that the white o-ring spout does electronic unit are not connected properly. is not visible. not stop Dolphin Blue BC633 Series...
  • Page 17 MULTIFEED DISPENSERS MANUAL 6mm BLACK TUBING ENSURE ENOUGH CLEARANCE FOR REFILLING ACCESS CUT TUBE TO 150 - 300mm 8mm CLEAR TUBING 130 x 190 BC633 Series Dolphin Blue...
  • Page 18 Dolphin Solutions Ltd Southpoint, Compass Park, Bodiam, Robertsbridge, TN32 5BS Tel: +44 (0)1424 20 22 24 Fax: +44 (0)1424 205 200 info@dolphinsolutions.co.uk www.dolphinsolutions.co.uk...

This manual is also suitable for:

Bc633

Table of Contents