Subscribe to Our Youtube Channel
Related Manuals for Dolphin DP1102E
Summary of Contents for Dolphin DP1102E
- Page 1 D P1 1 0 2E / DP110 2E- SAN DOLPHIN LIQUID SOAP AND DISINFECTANT SENSOR DISPENSER USER GUI D E F O R M AIN TENAN CE AND CARE TECHNIC AL HELPLINE 01424 202224 DOLPHINSOLUTIONS.CO.UK...
-
Page 2: Table Of Contents
CON TE NTS Open and close housing Refill tank Replace disp. bottle Change batteries Change pump Change eModule Check function Contact us... - Page 3 SA FE T Y I N FOR MATI ON Operating fluids and cleaning agents can cause skin and eye irritation or damage. ► Always wear protective gloves. ► Keep operating fluids and cleaning agents out of eyes. ► Observe the safety information on the packaging of the operating fluids and cleaning agents. Troubleshooting The dispenser only works when installed and, if applicable, when the housing is closed (surface-mounted dispensers).
- Page 4 Fault/LED signal Cause Solution Dispenser triggers sporadi- Interference due to mains ► Switch to battery operation cally without actuation supply line or static charge ► Check interference in the power grid and rectify if necessary Dispenser triggers continu- Sensor dirty ►...
- Page 5 Cleaning instructions for stainless steel surfaces: Soiling Recommended cleaning Recommended cleaning agent utensil Fingerprints, dust – Washing-up liquid solution – Damp cloth or leather – Commercially available – Dry cloth for buffing stainless steel or vinegar-based cleaning agent – Glass cleaner Soap residues inside –...
-
Page 6: Open And Close Housing
OP E N A N D CL OS E HOUSIN G For surface and flush mounted dispensers only. ► Open: Unlock the lock with the key and carefully open the housing. ► Close: Close housing as far as it will go, lock it and remove the key. -
Page 7: Replace Disp. Bottle
RE P L A C E DI S P. BO TT LE The disposable bottle is not intended for refilling. ► Open housing and check filling level. ► Bottle is empty Pull out empty bottle straight upwards. ► Residual liquid in the bottle: Pull out bottle and pump together upwards, hold them horizontally over a sink and pull bottle carefully off the... -
Page 8: Ch A N G E Ba T Ter Ies
CH A N G E BA T TER IES ► Do not use rechargeable batteries. ► Observe the notes on the disposal of batteries on page 10 (or your language). 1. Open battery compartment cover on the right hand side of the Module and remove batteries. -
Page 9: Change Pump
C H AN GE PUMP ► To avoid spilling residual soap in the dispenser: Pull out the pump and, if applicable, the bottle/plug-in tank together upwards. ► Hold the pump and the bottle/plug-in tank horizontally over a sink and remove the bottle from the pump. -
Page 10: Change Emodule
C H A N G E M O D U L E 2. + 3. 1. Pull out the pump together with the tank or disposable bottle upwards. 2. Press securing tab (B) to unlock Module and pull it out upwards. 3. -
Page 11: Check Function
CHECK FUNCTION With surface-mounted devices, the dispenser only works when the housing is completely closed. ► Hold your hand under the dispenser so that the Module triggers the pump. After changing the pump, several actuations may be required until liquid is dispensed. -
Page 12: Contact Us
CON TACT US Dolphin Southpoint, Compass Park Junction Road, Bodiam TN32 5BS United Kingdom +44 (0)1424 202 224 info@dolphinsolutions.co.uk dolphinsolutions.co.uk © Dolphin Solutions Ltd.
Need help?
Do you have a question about the DP1102E and is the answer not in the manual?
Questions and answers