Table of Contents
Advertisement
m@ CONNECTING DIGITAL INPUTS
LD player with AC-3
DIGITAL RF OUT
Component with
COAXIAL DIGITAL OUT
Component with
OPTICAL DIGITAL OUT
* A digital input should be connected to the components such as
LD player or DVD, etc. capable of outputing DTS Digital
Surround, Dolby Digital(AC-3), PCM or RF format digital signals.
« For details, refer to the operating instructions of the
component connected.
* When making the COAXIAL DIGITAL connection, be sure to
use a 75Q COAXIAL cord, not a conventional AUDIO cord.
@ CONNECTING SYSTEM CONTROL
Sherwood component
with DIGI LINK II or Ii
CD player
Tape deck
Graphic equalizer
* Connect this jack to the DIGI LINK jack of the external
Sherwood component that uses the DIGI LINK II or Ill remote
control system.
c
i 6
m@ CONNECTING SPEAKERS
Front right
Front left
A
Rear right
Rear left
¢ Never short circuit the + and — speaker cords.
¢ Be sure to connect speakers firmly and correctly
according to the channel (left and right) and the polarity
(+ and -).
* Be sure to use the speakers with the impedance of over
8Q.
¢ Always connect both rear speakers.
* For installing the speakers, refer to "Speaker placeme nt"
on page 15.
Advertisement
Table of Contents
