Table of Contents
Advertisement
When CD, DVD, LDP or AUX/TV is
selected as input source
* Select the digital (or the analog) input connected as
desired.
;
'
.
¢ Each time this button is pressed,
DIGITAL
.
.
.
INPUT
the corresponding input is
selected as follows;
—In the DTS mode
rc OPTICAL
COAXIAL
—In the Dolby Digital(AC-3) mode:Not available for CD
(RF:LDP only) — OPTICAL > COAXIAL—
* To play back the laser disc encoded the Dolby
Digital(AC-3) format in the Dolby Digital(AC-3)
mode, you should select the RF input as the desired
digital input. ~
—In the normal stereo or a surround mode other than the
DTS and Dolby Digital(AC-3) modes.
OPTICAL—
COAXIAL — ANALOG
¢ When LDP as input source and the normal stereo mode
are selected respectively, the RF input should be
selected to play back the laser disc encoded the Dolby
Digital(AC-3) mode in the 2~CH downmix mode.
« When playing back Dolby Digital(AC-3) program
sources in the normal stereo mode, it enters the 2-CH
downmix mode automatically, not the normal stereo
opertion.(For details, refer to "Downmixing into 2
fornt channels" on page 18.)
Notes:
« When the selected optical or coaxial digital input is not
connected, the selected DIGITAL INPUT indicator is
flickering, mening no sound. (Refer to "Select the
desired surround mode" on page 15.)
¢ When the DTS or Dolby Digital(AC-3) mode is
selected, the component connected to the selected
digital input can be heard.
Adjust the stereo balance between the left and
the right channels.
BALANCE
o
%
6
OECKA
DECKS
* It is adjustable only when a powered subwoofer is
connected and the subwoofer is set to "YES" .(Refer
to "Adjusting the speaker settings" on page 16)
To encrease the bass sound.
CINEMA BASS:
t
¢ Press it again to cancel.
Operate the selected component for playback.
¢ When playing back the program sources
with surround sound, refer to "Enjoying
surround sound" on page 15.
Adjust the (overall) volume.
MASTER VOLUME
Note : Extreme settings at high volume may damage
your speakers.
To mute the sound.
¢ "MUTE" will flicker.
¢ To resume the previous sound level, press it agin.
To listen with the headphones.
PHONES.
* Ensure that the SPEAKER ON/OFF switch is et to off.
Advertisement
Table of Contents
