Table of Contents
Advertisement
Adjuet the delay time.
Each time this button is pressed, the delay time
changes in regular intervals.
« If the delay time disappears, start from the step 12 again.
Memorize the delay time.
+ In Dolby Pro Logic mode, the rear delay time can be
memorized without pressing the DELAY TIME button.
In Dolby Digital(AC-3) mode, repeat the
above steps 13 and 14 to adjust the rear
delay time.
In THEATER, HALL, STADIUM or
CHURCH
Mode
Adjust the volume level of the rear speakers
relative to that of the front speakers.
Downmixing into 2 front channels
* This function can be operated only when playing back
the Dolby Digital(AC-3) program sources.
¢ During playback in the Dolby Digital(AC-3) mode,
press the STEREO button.
i
¢ "D0 AC-3" and "ST" indicators light up, meaning it
enters the 2-CH downmix mode, and then the 5
discrete channels (front L, center,front R, rear L. and
rear R) are mixed down to 2 front channels.
* When playing back the Dolby Digital(AC-3) program
sources in the normal stereo mode, it enters the 2-CH
downmix mode automatically.
« When the settings of the center and rear
speakers are adjusted to the NONE and NO modes
respectively in the Dolby Digital(AC-3) mode, if
playing back the Dolby Digital (AC-3) program
sources, it can also enter the 2-CH downmix mode.
¢ When playback is stopped or interrupted, etc., the 2-
CH downmix mode is not canceled but "OO AC-3"
and "ST" indicators goes off.
* To cancel the 2-CH downmix mode, select the desired
surround mode.
Advertisement
Table of Contents
