Table of Contents
Advertisement
Start recording on the VCR 1.
Memorize it within 5 seconds.
MEMO / ENTER
Start play on the LDP.
VCR1
REC
LoP
Start play on the CDP.
a
* The audio signal from CDP and the video
VIDEO SOURCE
AUDIO SOURCE
signal from LDP will be dubbed onto the
OTHER FUNCTIONS
-
Operating
the sleep
timer
¢ To set the receiver to automatically turn off after the
specified period of time.
e
ie)
¢ Each time this button is pressed, the sleep time changes
as follows;
_>19-320-330-»60-390-OFF
Unit : Minutes
4
« When the sleep time is selected, all display parels of
* Then the DYNAMIC RANGE indicator lights up.
Sherwood components connected by the DIGILINK Il
¢ Press again to cancel.
L
are dimly lit.
+ In some Dolby Digital(AC-3) softwares, this
function may not be used.
Checking the brightness of the
fluorescent displays
* Each time this button is pressed,
the brightness of all fLuorescent
displays of Sherwoot
components connect:<l by the
DIGI LINK III chanes together
as follows;
Eo
dim — OFF
+ In the display OFF mode, when any button is pxessed,
the receiver switches to the display ON mode,
Advertisement
Table of Contents
