TEFAL INDUCTION HEATING SPHERICAL MULTICOOKER Manual page 19

JAM FUNCTION
• Press "Menu" key to select function "Jam". The screen displays the
default cooking time, the "Start" light will flash red.
• You can change the cooking time by pressing "Temperature/Timer" key
first and then press "<" and ">" keys.
• Press "Start" key. The mulitcooker will start the "Jam" cooking program
and the "Start" light will come on. The screen will display the remaining
cooking time.
• At the end of cooking, the multicooker will "beep" three times.
Note: No keep warm function for this function
PASTA/PELMENI FUNCTION
• To cook pasta it is important to wait until the water reaches good
temperature before adding pasta.
• Press "Menu" key to select function "Pasta/Pelmeni". The screen displays
the default cooking time, the "Start" light will flash red.
• You can change the cooking time by pressing "Temperature/Timer" key
first and then press "<" and ">" keys.
• Press "Start" key. The mulitcooker will start the "Pasta/Pelmeni" cooking
program and the "Start" light will come on. The screen will display the
remaining cooking time.
• The multicooker will beep when the water is at the ideal temperature.
Put the pasta into the water and press the "start" key again to begin the
cooking process. The lid must remain open while the pasta is cooking.
• At the end of cooking, the multicooker will "beep" three times.
Note: No keep warm function for this function
EN
19