BMW i3 2018 Owner's Manual page 56

AT A GLANCE
Frequently asked questions
All requirements are met and all required steps
were completed in the specified order. Despite
that, the mobile device does not function as ex‐
pected.
In this case, the following explanations can help:
The iPhone has already been paired with Apple
CarPlay. When a new connection is established,
CarPlay can no longer be selected.
▷ Delete the iPhone concerned from the device
list.
▷ On the iPhone, delete the vehicle concerned
from the list of stored vehicles under Blue‐
tooth and under WiFi.
▷ Pair the iPhone as a new device.
If the steps listed have been carried out and the
required function is still not available: contact the
hotline, a dealer's service center or another quali‐
fied service center or repair shop.
Managing mobile devices
General information
▷ After one-time pairing, the devices are auto‐
matically recognized and reconnected when
standby state is switched on.
▷ The data stored on the SIM card or in the
mobile phone are transferred to the vehicle
after recognition.
▷ For some devices, certain settings may be
necessary, for instance authorization, see
owner's manual of the device.
Displaying the device list
All devices paired or connected with the vehicle
are displayed in the device list.
Via iDrive:
1. "My Vehicle"
2. "iDrive settings"
3. "Mobile devices"
56
General settings
Online Edition for Part no. 01402989267 - II/18
A symbol indicates, for which function a device is
used.
Symbol Function
"Telephone"
"Apps"
"Apple CarPlay"
Configuring the device
Functions can be activated or deactivated for
paired and connected devices.
Via iDrive:
1. "My Vehicle"
2. "iDrive settings"
3. "Mobile devices"
4. Select the desired device.
5. Select the desired setting.
If a function is assigned to a device, the function
will be deactivated where appropriate for a de‐
vice that is already connected and the device will
be disconnected.
Disconnecting the device
The connection of the device to the vehicle is
disconnected.
The device remains paired and can be con‐
nected again, refer to page 56.
Via iDrive:
1. "My Vehicle"
2. "iDrive settings"
3. "Mobile devices"
4. Select device.
5. "Disconnect device"
Connecting the device
A disconnected device can be reconnected.