Table of Contents
Advertisement
CONTROLS
▷
Each time the rocker switch is pressed to the
point of resistance, the desired speed in‐
creases or decreases by approx.
1 mph/1 km/h.
▷
Each time the rocker switch is pressed past
the resistance point, the desired speed
changes by a maximum of 5 mph/10 km/h.
Hold the rocker switch in position to repeat the
action.
Adjusting distance
Safety information
WARNING
The system cannot serve as a substitute for the
driver's personal judgment. Due to the system
limits, braking can be late. There is a risk of ac‐
cidents or risk of damage to property. Be aware
to the traffic situation at all times. Adjust the
distance to the traffic and weather conditions
and maintain the prescribed safety distance,
possibly by braking.
Adjusting
Press button repeatedly until the de‐
sired distance is set.
The set distance is briefly displayed in
the left part of the instrument cluster.
Continuing cruise control
General information
An interrupted cruise control can be continued
by calling up the stored speed.
Make sure that the difference between current
speed and stored speed is not too large before
calling up the stored speed. Otherwise, uninten‐
tional braking or accelerating may occur.
In the following cases, the stored speed value is
deleted and cannot be called up again:
156
Driving comfort
Online Edition for Part no. 01402989267 - II/18
▷
When the system is switched off.
▷
When drive-ready state is switched off.
Calling up stored speed and distance
Press button with the system switched
on.
Desired speed and distance are then continued
with these settings. The instrument cluster
briefly displays the selected distance.
Switching distance control on/off
Safety information
WARNING
The system does not react to traffic driving
ahead of you, but instead maintains the stored
speed. There is a risk of accidents or risk of
damage to property. Adjust the desired speed
to the traffic conditions and brake as needed.
Switching distance control off
Distance control can be switched off and on
when driving with cruise control activated.
Press and hold this button.
The indicator light in the instrument clus‐
ter lights up.
To switch distance control back on, press button
again briefly.
After changing over distance control, a Check
Control message is displayed.
Displays in the instrument cluster
Desired speed and stored speed
The desired speed is displayed next to
the symbol in the Info Display.
Advertisement
Table of Contents
