Table of Contents
Advertisement
With the BMW Connected app, refer to
page 180, the stationary climate control can be
switched on.
The air automatically exits through the vents to
the windshield, the side windows, the upper
body region and into the floor area.
The system switches off automatically after a
certain period of time.
If stationary climate control is used during the
charging process, less air conditioning capacity
will be required while driving. This optimizes the
range.
Functional requirements
▷
Drive-ready state is deactivated.
▷
High-voltage battery sufficiently charged or
charging cable connected.
If the high-voltage battery is heavily dis‐
charged, it can take some time after connect‐
ing the charging cable, until the stationary cli‐
mate control will be functional.
▷
Departure time preselected: depends on the
internal, external, and set desired tempera‐
ture.
▷
Direct operation via iDrive: does not depend
on the external temperature.
▷
The vents are open to allow air to flow out.
Switching on/off directly
Concept
The system can be switched on or off directly.
The system switches off automatically after a
certain period of time.
Via iDrive
The system can be switched on or off via iDrive.
1.
"My Vehicle"
2.
"Vehicle settings"
3.
If necessary, "Climate functions"
Online Edition for Part no. 01402989267 - II/18
Climate control
4.
"Activate comfort climate"
5.
"Activate now"
Climate control at departure time
Concept
Different departure times can be adjusted to en‐
sure a comfortable interior temperature in the ve‐
hicle at the time of departure.
The activation time is automatically determined
based on the temperature.
The system promptly switches on before the se‐
lected departure time.
The departure time is preselected in two steps:
▷
Set departure times.
▷
Activate departure times.
General information
If drive-ready state is switched off, changes can
be made on the Control Display. Departure time
can only be changed once. Scheduled departure
times are not adjusted. Settings for climate con‐
trol and charging process are also applied for
scheduled departure times.
Setting departure times
Via iDrive
1.
"My Vehicle"
2.
"Vehicle settings"
3.
If necessary, "Climate functions"
4.
"Activate comfort climate"
5.
"Plan comfort climate"
6.
Set the desired departure time, refer to
page 219.
Activating the departure time
Functional requirement
If a departure time is to influence the switching
on of the stationary climate control, the respec‐
tive departure time must be activated first.
CONTROLS
179
Advertisement
Table of Contents
