Table of Contents
Advertisement
3.
Remove the adapter after unscrewing the lug
bolt.
Screwing on
1.
Attach the adapter to the lug bolt. If neces‐
sary, turn the adapter until it fits on the lug
bolt.
2.
Screw on the lug bolt. The tightening torque
is 140 Nm.
3.
Remove the adapter and stow it after screw‐
ing on the lug bolt.
Preparing the vehicle
▷
Park the vehicle on solid and non-slip ground
at a safe distance from traffic.
▷
Switch on the hazard warning system.
▷
Set the parking brake.
▷
Engage a gear or move the selector lever to
position P.
▷
As soon as permitted by the traffic flow, have
all vehicle occupants get out of the vehicle
and ensure that they remain outside the im‐
mediate area in a safe place, such as behind a
guardrail.
▷
Depending on the vehicle equipment, get
wheel change tools and, if necessary, the
emergency wheel from the vehicle.
▷
If necessary, set up a warning triangle or port‐
able hazard warning light at an appropriate
distance.
▷
Secure the vehicle additionally against rolling.
▷
Loosen the lug bolts a half turn.
Online Edition for Part no. 01402989267 - II/18
Wheels and tires
Jacking points for the vehicle jack
The jacking points for the vehicle jack are lo‐
cated at the indicated positions.
MOBILITY
239
Advertisement
Table of Contents
