BMW i3 2018 Owner's Manual page 233

Table of Contents

Advertisement

Pull the speed limit sticker off the sealant
container and apply it to the steering wheel.
The use of a sealant can damage the TPM
wheel electronics. In this case, have the TPM
wheel electronics replaced at the next oppor‐
tunity.
The compressor can be used to check the
tire inflation pressure.
Overview
Storage
The Mobility System is located in the storage
compartment under the hood.
Sealant container
Sealant container, arrow 1.
Filling hose, arrow 2.
Observe use-by date on the sealant container.
Compressor
1 Sealant container unlocking
2 Sealant container holder
3 Tire pressure gage
Online Edition for Part no. 01402989267 - II/18
Wheels and tires
4 Reduce tire inflation pressure button
5 On/off switch
6 Compressor
7 Connector/cable for socket
8 Connection hose
Filling the tire with sealant
Safety information
DANGER
If the exhaust pipe is blocked or ventilation is in‐
sufficient, harmful exhaust gases can enter into
the vehicle. The exhaust gases contain pollu‐
tants which are colorless and odorless. In en‐
closed areas, exhaust gases can also accumu‐
late outside of the vehicle. There is danger to
life. Keep the exhaust pipe free and ensure suf‐
ficient ventilation.
NOTE
The compressor can overheat during extended
operation. There is a risk of damage to prop‐
erty. Do not run the compressor for more than
10 minutes.
Filling
1.
Shake the sealant container.
MOBILITY
233

Advertisement

Table of Contents
loading

This manual is also suitable for:

I3s 2018

Table of Contents