BMW i3 2018 Owner's Manual page 212

Table of Contents

Advertisement

MOBILITY
WARNING
If a sufficient safety distance from easily flam‐
mable materials is not maintained, simultane‐
ous charging and filling with fuel can cause a
risk of fire. There is a risk of injury or risk of
damage to property. Do not fill the vehicle with
fuel and charge it simultaneously.
WARNING
Contact with live components can lead to an
electric shock. High voltage is applied at the
charging connection. There is a risk of injury or
danger to life.
The manufacturer of your vehicle recommends
that work on the charging connection, for in‐
stance cleaning, be performed only by an au‐
thorized BMW i dealer's service center or an‐
other qualified service center or repair shop.
Charging cable
General information
Use a Level 1 charging cable, Level 2 charging
cable or the permanently installed charging cable
of a charging station to charge the vehicle.
Different charging cables can be required de‐
pending on the country.
Safety information
WARNING
Non-compatible charging cables or unsuitable
charging stations can heat up and cause dam‐
age to the vehicle. There is a risk of fire. Use
charging cables or charging stations for charg‐
ing that are suitable for the respective vehicle
type.
212
Charging the vehicle
Online Edition for Part no. 01402989267 - II/18
A dealer's service center will be glad to provide
information about suitable charging cables.
WARNING
Improper use of the charging cable can prevent
charging and lead to damage, for instance ca‐
ble fire. There is a risk of fire. Use the charging
cable only for charging the vehicle, and do not
extend it using cables or adapters.
WARNING
Damaged charging cables can heat up or lead
to an electric shock. There is a risk of fire or a
risk of injury. Use undamaged charging cables
only.
Level 1 charging cable
The vehicle is supplied with a Level 1 charging
cable.
With the Level 1 charging cable, it is permissible
to perform charging from grounded household
sockets. At the power connection of a household
socket, charging is done with alternating current.
When a Level 1 charging cable is used, this may
produce efficiency values other than indicated on
the energy label.
Level 2 charging cable
The Level 2 charging cable makes it possible to
quickly recharge at sockets of designated
Level 2 charging stations using a special plug.
Charging is performed with alternating current at
designated Level 2 charging stations. The charg‐
ing process can be completed faster than at
household sockets.
If necessary, the charging cable is attached to
the charging station.
If a Level 2 charging cable is used, apply the cor‐
responding setting via iDrive, refer to page 217.

Advertisement

Table of Contents
loading

This manual is also suitable for:

I3s 2018

Table of Contents