Nauticam 36072 Instruction Manual
  1. Manuals
  2. Brands
  3. Nauticam Manuals
  4. Camera Accessories
  5. 36072
  6. Instruction manual

Nauticam 36072 Instruction Manual

O90-f focus gear for om m.zuiko digital ed 90mm f/3.5 macro is pro
Hide thumbs
1
2
3
4
5
6
7
8
9
Table of Contents

Advertisement

Quick Links

Download this manual
Current as of 3/23/2023
INSTRUCTION MANUAL
for O90-F Focus Gear for OM M.Zuiko
Digital ED 90mm f/3.5 Macro IS PRO
PN# 36072
FORWORD
Thank you for your purchase of a NAUTICAM
product.
At NAUTICAM, we pride ourselves in the ability to
recognize the requirements of professional as well
as amateur underwater photographers and fulfill
them through the innovative designs of our
products. We strive to achieve a high level of user-
friendliness by allowing stress-free installation and
easy operation of all important functions of the
camera.
Each product is individually inspected and water
pressure tested to ensure optimum quality.
Please read this manual carefully before using the
product, this will maximize its performance as well
as its lifetime.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 36072 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Nauticam 36072

Summary of Contents for Nauticam 36072

  • Page 1 PN# 36072 FORWORD Thank you for your purchase of a NAUTICAM product. At NAUTICAM, we pride ourselves in the ability to recognize the requirements of professional as well as amateur underwater photographers and fulfill them through the innovative designs of our products.

  • Page 2: Warranty

    • Do not open the product in a wet or sandy with and/or placed within our products. environment. Protect the interior from moisture NAUTICAM accepts no liability for any loss of and debris in order to prevent malfunction or captured images or the inability to capture images leakage.

  • Page 3: Package Contents

    PACKAGE CONTENTS • Make sure that you have all the included items listed below before using this product. • If some items are missing or damaged, contact your local Nauticam dealer. O90-F Focus Gear Plastic C-ring Focus Knob Screw covers...

  • Page 4: Identification Of Parts

    IDENTIFICATION OF PARTS Plastic C-ring O90-F Focus Gear Focus Knob Spare Rubber grips x 6 Preparation of the Product 1. After verifying that the sealing O-ring is in good condition, lightly coat it with the lubricant provided and wipe away the excess. 2.
  • Page 5 MOUNT THE GEAR ON A LENS 1. Insert the plastic C-ring as shown and place it over the lens. 2. Insert the O90-F Focus Gear on the plastic C-ring until it reaches the flange of the plastic C-ring. 3. To remove the O90-F Focus Gear, reverse the above steps.
  • Page 6 MOUNT KNOB TO PORT 1. Remove the screw covers and the screws, then take out the focus knob plug from the port. 2. Separate the pre-installed knob by removing the three screws as shown following step 1 & 2. Then take out the shaft from the knob sleeve.
  • Page 7 MOUNT KNOB TO PORT 1. Mount a shaft on a knob sleeve of the focus knob as shown 2. Screwing the knob to the knob sleeve and plug the screw cover. 2. Locking the knob clockwise.

  • Page 8: Install The Lens

    INSTALL THE LENS 1. Make sure the Focus knob and the Focus Limiter Switch Selector are at the most outwards position before installing the lens. 2. Turn the knob both ways to check if the gear is engaged with camera lens...

  • Page 9: Specifications

    O-ring with the provided lubricant before reinstalling it in the groove. A damaged O-ring should be discarded immediately and replaced only with one that is provided by NAUTICAM. Please refer to "Nauticam Product Care and Maintenance Guide" for more details.

Table of Contents