Remote Communication; Rs-232 Port Setup - UNI-T UDP6722 User Manual

Programmable dc power supply
Table of Contents

Advertisement

User's Manual
Protocol
Address
Baud rate
IP address
IP port
Shortcut key at the bottom of the screen:
Measurement display: return to <Measure> page;
System service: for calibration (not open for user);
Factory setting: for restore the instrument to the factory setting;
About: Model/serial number/hardware version/software version of the instrument (as shown in the following
figure).

15. Remote Communication

15.1 RS-232 Port Setup

15.1.1 RS-232
Instruments.uni-trend.com
8 data bits, 1 stop bit, no check bit.
USB is virtual serial port.
The instrument supports the communication
SCPI, Modbus
protocol of SCPI and Modbus
Station address in Modbus protocol, it supports 0x00
1-32
broadcast communication.
9600,19200,
The baud rate of RS232, RS485 and USB bus.
38400,57600,115200
/
IP address when connecting LAN bus.
502
Port number of LAN bus, it cannot be changed.
Figure 13-3 <About> page
UDP6722 Programmable DC Power Supply
28 / 32

Advertisement

Table of Contents
loading

Table of Contents