Table of Contents
Advertisement
User's Manual
13.1 File Management (local)
In <Wage> page, press [File] under the screen, or in <measure> page, press [file] under the screen, we will enter
the file <Local> page.
If USB is inserted, press <Udisk File> shortcut key to manage the file in USB. By turning the rotary knob or
pressing arrow keys to enter the following table.
Shortcut key of file management
Shortcut Key
No.
Load
Save
Delete
Rename
>
PowerOnLoad
AutoSave
Copy Udisk
<
Instruments.uni-trend.com
Setting
The number of saved file, number 0 is the default file and
0-39
cannot be deleted.
/
Loading the file in this line, the current list setup will lost.
Save the setup into this line file.
Blank line: create a new list file
/
Existing file: overlay the current file and the name will not
change.
/
Delete the current file and the default file cannot be deleted.
Rename the current file and the default file cannot be changd.
/
The way of rename the file can refer to Rename in List File.
/
Display the subordinate shortcut key menu.
On: The instrument will recall the file after the instrument
boots up.
Off,On
If the boot recalling of this line is cancled, the default file wibb
be enable boot recalling.
On: The setup will save in the line of the corresponding file in
real-time.
Off,On
Only the file that boot recalling is enabled can be automatic
saved.
Copy this file to USB, in the root directory of
/
UDP6722\CONFIG, the suffix is *.STA.
/
Display the previous shortcut key menu.
UDP6722 Programmable DC Power Supply
Description
26 / 32
Advertisement
Table of Contents
