Table of Contents
Advertisement
User's Manual
<Delayer Setup>
Shortcur Key
FileNum
Start
Group
Repeat
Finish
Enable
Sheet
Memory
Press [Sheet] key to enter the parameter setup of delayer output.
Instruments.uni-trend.com
Figure 10-1 Basic Parameter of Delayer
Setting
The currently loading list file, press [Save] shortcut key to
/
enter <Delayer File> to save and recall the file.
Select the line to start the test from the list on the right side,
0-199
the default is 0.
Count the output step starts from the initial group number,
1-199
the default is 1.
1-9999
Times of test cycly, the default is 1.
Stop: stop the output when the test is finished.
Stop, Hold
Hold: output the last test item when the test is finished.
Whether to enable the delayer test, if the delayer test is
enabled, DELA displays in title bar.
After the delayer test is enabled, press [On/Off] key to start
Off,On
the delayer test and the indicator will blinking to distinguish
from the normal output.
Enable the delayer test will turn off the list function.
Enter sheet setting
Enter disk (local disk and Udisk)
Figure 10-2 Parameter Setup of Delayer Output.
UDP6722 Programmable DC Power Supply
Description
22 / 32
Advertisement
Table of Contents
