Download Print this page

Advertisement

Quick Links

Model: 300-3PT-BL
(5303087)
(300 Gallon 3-Point Sprayer
w/Boom-Buster 'Boomless' Boom Assembly
& Handgun, Pump, Coupler & Agitator)
General Information
Thank you for purchasing this product. The purpose of this
manual is to assist you in operating and maintaining your
3 Point sprayer.
Retain a copy of your receipt for your unit, as it will be required
to validate any warranty service.
Warranted against manufacturer or workmanship defects from
date of purchase with copy of receipt:
Homeowner Usage: One Year
Commercial Usage: 90 Days.
1.
Install the preassembled tee valve sub-assembly to the 3-point
carrier valve mount and position as shown.
OWNER'S MANUAL
Assembly Instructions
Category I or II
BEFORE RETURNING THIS PRODUCT
FOR ANY REASON, PLEASE CALL
1-800-831-0027
MONDAY-FRIDAY, 8:00 AM TO 5:00 PM CST
If you should have a question or experience a problem with
your Fimco Industries Product: Visit our website @
www.fimcoindustries.com or call the Toll free number above. Our
technical support representatives will be happy to help you.
In most cases a customer service rep. can resolve
the problem over the phone.
To obtain prompt, efficient service, always remember to give the
following information....
• Correct Part Description and/or part number
• Model number and Serial Number
Part descriptions and numbers can be obtained from the
illustrated parts list section(s) of this manual.
www.fimcoindustries.com
1000 FIMCO Lane, P.O. Box 1700, North Sioux City, SD 57049
Toll Free Phone: 800-831-0027 : Toll Free Fax: 800-494-0440
[5195390
2.
Slide a hose clamp on to the
bypass hose (from the relief
valve), then with a twisting
motion, slip the bypass hose
over the fitting on the top of
the tank. Slide the hose clamp
to the end of the hose and
secure.
(09/20)]
Page 1

Advertisement

loading

Summary of Contents for Fimco 300-3PT-BL

  • Page 1 Slide the hose clamp to the end of the hose and secure. www.fimcoindustries.com 1000 FIMCO Lane, P.O. Box 1700, North Sioux City, SD 57049 Toll Free Phone: 800-831-0027 : Toll Free Fax: 800-494-0440 Install the preassembled tee valve sub-assembly to the 3-point [5195390 (09/20)] carrier valve mount and position as shown.
  • Page 2 3/4” 1” Using a good quality thread sealant, thread the 1” fitting into the inlet (IN) side of the pump and the 3/4” fitting to the outlet (OUT) side of the pump. With a twisting motion, attach the other end of fitting into the strainer.
  • Page 3 Boom Assembly Instructions Attach the boom buster bracket to the telescoping brackets, using the two square u-bolts and 4 whiz nuts. The telescoping brackets are already mounted to the 3-point frame. Slide the boom buster subassembly onto the boom buster bracket.
  • Page 4: Operation

    Information About the Sprayer Determining the proper speed of the pulling vehicle can be done by marking off 100, 200 & 300 feet. The speed chart indicates the num- Roller pumps are positive displacement pumps, which means that ber of seconds it takes to travel the distances. Set the throttle and the entire solution being pumped must go somewhere or the pump with a running start, travel the distances.
  • Page 5 Boomless spray nozzles are great for rough terrains, road side spraying, fence rows and other areas that are difficult to apply with a traditional boom. Gallons per Acre GAL/1000 Sq. Ft. Swath BROADCAST & TURF APPLICATIONS Width (Ft) @ 40 PSI Thread XT Model 0.32...
  • Page 6 Refill the tank about half full with some components of your sprayer plain water and use FIMCO Tank Neutralizer and Cleaner and repeat *** Insure that this connection point will not allow the roller pump to...
  • Page 7 1/2” NPT (F) Spray Line Connection  3/4” NPT (F) Continuous By-Pass Connection  Valves may be connected w/close nipples for multiple section spray control Description Fimco # Mfg. Part # Directo-Valve (AA6B) 5143316 AA6B Repair Kit, Items Marked * *...
  • Page 8: Exploded View

    Exploded View: 300-3PT-BL (5303087) Refer to the parts list Detail C next page for part numbers. See Detail B See Detail A OUT to Valves IN to Pump See Detail C Detail A Detail B Page 8...
  • Page 9 Parts List: 300-3PT-BL (5303087) * *: Available ONLY in complete assembly Hose to Bypass Plumbing Detail Hose to LH BoomBuster Hose to RH BoomBuster Hose to Agitator Page 9...
  • Page 10 Dimensions 73.000” 68.875” 38.000” 54.000” 9.500” 37.500” 47.500” Operation Black As solution is forced through the agitator, the venturi action 1/8” Orifice triples the flow through the agitator. The valve in the line may shut off the agitation completely when not needed or it can throttle the amount of solution 5/32”...
  • Page 11: Troubleshooting

    Roller Pump General Safety Information Use a pressure relief device on the discharge side of the Disconnect power before servicing. pump to prevent damage from pressure buildup when the 10. Release all pressure within the system before servicing any pump discharge is blocked or otherwise closed and the pow- component.
  • Page 12: Warranty

    WHAT REMEDIES ARE AVAILABLE UNDER THIS LIMITED WARRANTY. If the conditions set forth above are fulfilled and the Equipment or any part thereof is found to be defective, Fimco, Inc. shall, at its own cost, and at its option, either repair or replace the defective Equipment or part.

This manual is also suitable for:

5303087