Sinoboom GTJZ0407SE Operation Manual

Hide thumbs Also See for GTJZ0407SE:

Maintenance manual (114 pages)

Operation manual (36 pages)

Operation manual (78 pages)

Table Of Contents

100

101

102

103

104

page of 104

/ 104
Contents
Table of Contents
Bookmarks

Table of Contents

Quick Links

Download this manual

Part No.501040100002

Rev: B

Oct 2021

Operation

Manual

产品说明书

PRODU

C T MAN U AL

GTJZ0407SE/0407SE/1330SE

0608E (2132E)

G T JZ

0808E (2732E)

G T JZ

0808E (2732E)

G T JZ

0808E (2732E)

Table of Contents

Need help?

Do you have a question about the GTJZ0407SE and is the answer not in the manual?

Questions and answers

Summary of Contents for Sinoboom GTJZ0407SE

Page 1 Operation Part No.501040100002 Rev: B Manual Oct 2021 产品说明书 PRODU C T MAN U AL GTJZ0407SE/0407SE/1330SE 0608E (2132E) G T JZ 0808E (2732E) G T JZ 0808E (2732E) G T JZ G T JZ 0808E (2732E)
Page 3 Operating, servicing and maintaining this vehicle or equipment can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle or equipment in a well-ventilated area and wear gloves or wash your...
Page 4 : No.128, East Jinzhou Avenue, Ningxiang High-tech Industrial Park, Changsha, Hunan, China Zip Code : 410600 Copyright © Hunan Sinoboom Intelligent Equipment Co., Ltd. All Rights Reserved The final interpretation right of this manual belongs to Hunan Sinoboom Intelligent Equipment Co., Ltd.
Page 5 10 Decals/Nameplates Inspection, page 10-1 of the Operation Manual for details.) Trade identification MODELS SERIAL NO. Imperial Metric From 0104002940 to present GTJZ0407SE 0407SE 1330SE NOTE: • Product model is applied in product nameplate for distinction of products of different main parameters. •...
Page 6 This Page Intentionally Left Blank...
Page 7 This manual covers the basic parts information of one or more products. Therefore, please use this manual according to your needs. If you find problems in the manual or have suggestions for improve- ment, feel free to share your feedback with Sinoboom, and we will address these issues as soon as possible.
Page 8 This Page Intentionally Left Blank...
Page 9: Table Of Contents
Crush Hazards ......3-7 (SINOBOOM) ......6-8 Explosion and Fire Hazards.
Page 10 Decals/Nameplates(CSA) ..10-23 Appendix 1: Symbols and Description....... A-1 Appendix 2: Prepare the Work Record Before Delivery ..A-5 Appendix 3: Repair & Inspection Report ......A-7 Appendix 4: Major Modification and Repair Record ..... A-9 © Oct 2021 GTJZ0407SE Operation Manual...
Page 11: Introduction
The owner or administrator of the machine shall also provide the manufacturer’s maintenance information to the person responsible for maintaining the machine. If you have any questions, contact Hunan Sinoboom In- telligent Equipment Co., Ltd.. GTJZ0407SE Operation Manual © Oct 2021...
Page 13: Performance Parameters
PERFORMANCE PARAMETERS Table 1-1 GTJZ0407SE Specifications 0407SE (METRIC) 1330SE (IMPERIAL) MEASURE DIMENSION PARAMETERS Max. platform height 3.8 m 12 ft 5.6 in Max. working height 5.8 m 19 ft Max. horizontal reach 0.6 m 2 ft Length 1.42 m 4 ft 7.9 in Width 0.76 m...
Page 14 PERFORMANCE PARAMETERS Table 1-1 GTJZ0407SE Specifications (continued) 0407SE (METRIC) 1330SE (IMPERIAL) MEASURE Max. noise 72dB POWER PARAMETERS Drive×steer 2 WD×2 WS Power unit motor (voltage/power) 24V DC, 1.6 kW Hydraulic tank capacity 0.9 gal (imperial)/1.05 gal (US) Hydraulic system pressure...
Page 16 23. Flash Light √ √ 24. Steer Cylinder √ 25. Steer Wheel √ 26. Drive Reducer,DC √ 27. Ground Controller √ 28. Power Unit √ 29. Hydraulic Oil Tank √ 30. Rear Wheel √ © Oct 2021 GTJZ0407SE Operation Manual...
Page 17 Operating/raised position： The machine comes in operating/raised position when the platform is raised until the down limit switch disengages. Note：The platform height(from ground to platform floor) is 2±0.2m(6ft 7in±8in) when the down limit switch disengages. GTJZ0407SE Operation Manual © Oct 2021...
Page 19: Safety
Failure to notify the manufacturer within SAFETY DEFINITIONS 48 hours of the incident involving the machine of Hunan Sinoboom Intelligent Equipment Co., Ltd. may void the product's warranty. This safety alert symbol appears with most safety statements. It means atten-...
Page 20: Electrocution Hazards
Table 3-1 Minimum Safe Distance Voltage Minimum Safe Distance (Phase to Phase, kV) (m/ft) 0-50 3.05 (10) 50-200 4.60 (15) 200-350 6.10 (20) 350 -500 7.62 (25) 500 -750 10.67 (35) 750 -1000 13.725 (45) © Oct 2021 GTJZ0407SE Operation Manual...
Page 21 Do not replace key parts that af- have left the platform. fect machine stability with parts of different weights or specifications. • Do not modify or change moving aerial platforms without the manu- facturer’s prior written permission. GTJZ0407SE Operation Manual © Oct 2021...
Page 22: Work Environment Hazards
0.8 km/h (0.5 mph) when the plat- gas/dust.If the machine is to be used in any other appli- form rises. cations, or by any other means, other than those speci- fied by Sinoboom, it must be approved or guided by the manufacturer. Table 3-3 BEAUFORT...
Page 23: Unsafe Operation Hazards
• Do not push any object outside Maximum Slope: the platform. The maximum lateral force allowed for indoors is 400 N GTJZ0407SE: 25% (14°) (90 lbf). Climbing capacity means the maximum allowable tilt • Do not change any machine parts...
Page 24: Fall Hazards
COLLISION HAZARDS At a minimum, operators must operate and maintain the machine as stated in the Operation Manual and in the Maintenance Manual in addition to following more strin- gent industry regulations and workplace rules. © Oct 2021 GTJZ0407SE Operation Manual...
Page 25: Crush Hazards
• Maintain good judgment and plan- ning when using the controller on the ground to operate the ma- chine. Maintain proper distance between operator, machine and fixed object. GTJZ0407SE Operation Manual © Oct 2021...
Page 26: Explosion And Fire Hazards
During operation, keep the left and right doors of the chassis closed and locked. Only trained service personnel can open the left and right doors to repair the machine. © Oct 2021 GTJZ0407SE Operation Manual...
Page 27: Battery Hazards
• Never store the battery in water or humid atomosphere. • Daily check the battery cable for damage, and replace any damaged parts before operating the machine. GTJZ0407SE Operation Manual © Oct 2021...
Page 28: Welding And Polishing Requirements3-10
5. Block the wheels with the wheel wedges. maintenance requirements in the Operation Manual 6. Charge the battery. and the Maintenance Manual. NOTICE After using the machine, the power off switch must be disconnected. © Oct 2021 3-10 GTJZ0407SE Operation Manual...
Page 29: Jobsite Inspection
Operators must identify and avoid workplace hazards when mov- ing, installing and operating the machine. Unless approved by Sinoboom, never operate the ma- chine in a hazardous site. The following items present danger on the jobsite: •...
Page 31: Pre-Operation Inspection
4. The operator should go through a professional train- ing based on this operation manual, and should be certified as a qualified operator in operation of this machine. GTJZ0407SE Operation Manual © Oct 2021...
Page 32: Conducting A Pre-Operation
• Tires and wheels Be sure to correct the problem before operating the machine. • Safety arm Perform the following procedures with the platform • Limit switches and horn retracted: • Alarms and LEDs © Oct 2021 GTJZ0407SE Operation Manual...
Page 33: Inspect Battery Level
The battery is at 30% of its capacity. The battery level is at 20%, which is low. The battery re- quires recharging. The battery level is at 10%, which is very low. The machine will become slow. The battery requires recharging. GTJZ0407SE Operation Manual © Oct 2021...
Page 35: Pre-Operation Function Test
Figure 6-1 After any maintenance, the operator must perform an- other pre-operation inspection before conducting a pre- operation function test. 5. Ground Control 1. Hour Meter Position 6. Emergency Stop 2. OFF Position Button GTJZ0407SE Operation Manual © Oct 2021...
Page 36: Testing The Ground Controller （Sinoboom/Dtc System-K500
3. Ensure the relevant indicator turns on and does not display an error message. TESTING THE EMERGENCY STOP FUNCTION Figure 6-2 Ground controller（SINOBOOM/ 1. Put the emergency stop button on the ground into DTC system-K500） the OFF position by pressing it. Ensure all func- tions shut down.
Page 37: Testing The Platform Controller (Dtc)
1. With the enable button not pressed, directly press the function button. The relevant function should not operate. 2. Simultaneously press and hold the enable button and the function button. The relevant function should operate. GTJZ0407SE Operation Manual © Oct 2021...
Page 38 Lift function • Do not remove, modify or disable the footswitch (if equipped) by adding stops or any other means to prevent death or serious injury. © Oct 2021 GTJZ0407SE Operation Manual...
Page 39 Note: The drive speed is in direct proportion to the travel distance of the joystick. EMERGENCY NOTICE The brake must be able to hold the machine at any slope the machine is able to climb. Steer function GTJZ0407SE Operation Manual © Oct 2021...
Page 40: Testing The Platform Controller
OFF position. All 7. Drive reverse functions should not be able to operate. 2. Pull out the emergency stop button on the platform and ground to the ON position. Horn button © Oct 2021 GTJZ0407SE Operation Manual...
Page 41 Note: The drive/steer speed vary with the joystick Drive and brake functions deflection, the less the joystick is deflected, the slower the speed. Drive high/low speed select button GTJZ0407SE Operation Manual © Oct 2021...
Page 42: Testing The Platform Controller
2. Push the button again, the button indicator light should be off and the machine should drive at high speed. Figure 6-5 Platform controller (SINOBOOM) 8. Emergency stop 1. Steer right button 9.
Page 43 2. Pull out the emergency stop button on the platform and ground to the ON position. Note: The lift/lower speed is in direct proportion to the travel distance of joystick. Horn button Drive and brake functions GTJZ0407SE Operation Manual © Oct 2021...
Page 44: Testing The Drive Speed
Driving the machine at a reasonable speed is essential to safe machine operation. The drive function should Drive high/low speed select switch respond quickly and smoothly under the control of the operator. The machine should drive within its entire © Oct 2021 6-10 GTJZ0407SE Operation Manual...
Page 45: Testing The Emergency Lowering
Low speed test: DTC system：Press the drive/steer function 3. —SINOBOOM system: Move upwards the lift enable switch, and then press the drive high/ function enable switch on the platform controller, the indicator light of the switch should be on.
Page 46: Testing The Tilt Protection Function
Drive the machine down and remove the wooden boards. 9. Place the two wooden boards under the two wheels on the front or back side of the machine, and then © Oct 2021 6-12 GTJZ0407SE Operation Manual...
Page 47: Testing The Pothole Guard
1. Position the machine on a flat, level and solid sur- face clear of obstacles, ensure each bearing and sliding groove is well lubricated. GTJZ0407SE Operation Manual 6-13 © Oct 2021...
Page 49: Operating The Machine
If the platform controller displays the number “02”, rules and instructions in this Operation Manual. press the emergency stop button immediately. GTJZ0407SE Operation Manual © Oct 2021...
Page 50: Using The Emergency Lowering
5. Pull out the emergency stop button on the ground 3. Locate the brake on the drive motor. controller to the ON position, and meanwhile hold the Enter key for 5s, the setting screen will be shown on the display. © Oct 2021 GTJZ0407SE Operation Manual...
Page 51: Operation From Ground
When the platform display indicates a low battery level, the drive and lift speeds of the machine To drive： will slow down. The drive function can not be operated from the ground To steer: controller. GTJZ0407SE Operation Manual © Oct 2021...
Page 52 1. Press the drive/steer function enable switch, hold the enable switch on the control joystick and slowly push forward/backward the control joystick to drive forward/reverse. 2. Speed up: slowly move the joystick off center. © Oct 2021 GTJZ0407SE Operation Manual...
Page 53: Operating With The Platform Control
• Do not fold the rails while the machine is working. • Fold/unfold the rails only when the machine is stowed and extension platform fully retracted. GTJZ0407SE Operation Manual © Oct 2021...
Page 54: Charging The Battery
70 ℃. CHARGING THE BATTERY The batteries used include 3 types: lead acid, lead acid maintenance-free and lithium batteries, and the latter two batteries do not need maintenance. © Oct 2021 GTJZ0407SE Operation Manual...
Page 55 -20℃~45℃. Add deionized water. Put back the bucket cover and connect the Charging the lead acid battery (requiring water refilling plug. maintenance) GTJZ0407SE Operation Manual © Oct 2021...
Page 56: Charger Led And Digital Display
To switch the curve: 1. Press and hold the Select key for 5s and release, the display will indicate the current curve code. 2. Press gently for 1s and release to switch the charging curve codes. © Oct 2021 GTJZ0407SE Operation Manual...
Page 57 Charger in-built curve codes and respective battery models Table 7-2 Curve codes Battery models Common type of Flooded Trojan 30XHS DC85–12 DC115–12_(Float-Mode) EV31A-A US 27DC XC2 SB12V160E-ZC 24TMX 27TMH DC115–12_(3–Stage-Mode) Note: the default curve code is b48. GTJZ0407SE Operation Manual © Oct 2021...
Page 59: Transporting And Lifting The Machine
4. The forklift fork must align with the position of the the machine from rolling. forklift slots. 5. Drive forward to the fork frame to insert it fully into the slots. GTJZ0407SE Operation Manual © Oct 2021...
Page 60: Lifting The Machine With A Crane
NOTICE During transportation, retract the extension platform so that the extension platform is secure at the slots. Ensure that the extension platform cannot extend or shake out of the main platform during transportation. © Oct 2021 GTJZ0407SE Operation Manual...
Page 62 TRANSPORTING AND LIFTING THE MACHINE This Page Intentionally Left Blank © Oct 2021 GTJZ0407SE Operation Manual...
Page 63: Maintenance
Conduct a quarterly inspection on machines that pany to perform a pre-delivery inspection. have been out of service for a period lasting longer than three months. 2. Follow this procedure each time before delivery. Performing a pre-delivery inspection could reveal GTJZ0407SE Operation Manual © Oct 2021...
Page 64: Following Amaintenance Schedule
Every day or every 8 hours maintenance procedure requirements. Every quarter or every 250 hours 2. The Repair & Inspection Report shall include the inspection table of each regular inspection. © Oct 2021 GTJZ0407SE Operation Manual...
Page 65 Condition Malfunction B-1 Inspect Electric Wires B-2 Inspect Rim, Tire and Fasteners B-3 Inspect Battery B-4 Inspect Hydraulic Oil B-5 Inspect Hydraulic Tank Air Filter B-6 Inspect Manual Brake Release B-7 Inspect Emergency Lowering GTJZ0407SE Operation Manual © Oct 2021...
Page 66: Major Modification And Repair Record
1. A major modification/repair is a modification/repair company. made to all or part of a machine that affects the 3. Major modifications/repairs to the machine must be stability, strength or performance of the machine. performed by a qualified service technician. © Oct 2021 GTJZ0407SE Operation Manual...
Page 67 Maintenance and Inspection Report is “YES”, the Table 9-4 Major Modification and Repair Record Model Serial No. Machine Repair- Repairman’s Status Problem Description Modification/Repair Item Date Company and Signature Position ter Change GTJZ0407SE Operation Manual © Oct 2021...
Page 69: Decals/Nameplates Inspection
Do not operate the engine if there are missing or badly worn safety labels. GTJZ0407SE Operation Manual 10-1 © Oct 2021...
Page 70: Decals/Nameplates(Gb)
DECALS/NAMEPLATES INSPECTION DECALS/NAMEPLATES(GB) 9 10 11 19 11 10 17 21 11 10 9 © Oct 2021 10-2 GTJZ0407SE Operation Manual...
Page 71 DECALS/NAMEPLATES INSPECTION Description Part NO. Remarks 101040100013 GTJZ0407SE decals GB 101040103021 LOGO-SINOBOOM 101040103026 Decal-0407SE Attention line, 50mm wide 216060000004 101012100018 Decal-Crush hazard 101012100029 Decal-Crush hazard 101014100034 Decal-Contact information Decal-Electrical plug 101014100030 Decal-Lifting point 101014100020 Decal-Tie-down point 101014100021 Decal-Wheel load 500kg...
Page 72 DECALS/NAMEPLATES INSPECTION Description Part NO. Remarks Decal-0407SE operation requirements 101040100016 101058103001 LOGO-IPAF Decal-Lanyard anchorage point 101048100014 Decal-Emergency lowering 101014100025 101040103008 Decal-Brake release © Oct 2021 10-4 GTJZ0407SE Operation Manual...
Page 73: Decals/Nameplates(Ce)
DECALS/NAMEPLATES INSPECTION DECALS/NAMEPLATES(CE) 10 11 15 8 14 18 GTJZ0407SE Operation Manual 10-5 © Oct 2021...
Page 74 DECALS/NAMEPLATES INSPECTION Description Part NO. Remarks 101040100017 GTJZ0407SE decals CE 101040103021 LOGO-SINOBOOM 101040103008 Decal-Brake release 101012100018 Decal-Crush hazard Decal-Electrical plug 101014100030 Decal-Lifting point 101014100020 Decal-Tie-down point 101014100021 Decal-Wheel load 500kg 101040103025 101014100013 Decal-Crush hazard 101012100005 Decal-Electrocution hazard Decal-High pressure hazard...
Page 75 DECALS/NAMEPLATES INSPECTION Description Part NO. Remarks 101012100029 Decal-Crush hazard Decal-Battery weight 66kg 101040103018 Attention line, 50mm wide 216060000004 GTJZ0407SE Operation Manual 10-7 © Oct 2021...
Page 76: Decals/Nameplates(Ansi)
DECALS/NAMEPLATES INSPECTION DECALS/NAMEPLATES(ANSI) 14 18 15 11 15 8 7 © Oct 2021 10-8 GTJZ0407SE Operation Manual...
Page 77 DECALS/NAMEPLATES INSPECTION Description Part NO. Remarks 101040103009 GTJZ0407SE decals ANSI 101040103021 LOGO-SINOBOOM 101040103008 Decal-Brake release 101012100018 Decal-Crush hazard Decal-Electrical plug 101014100030 Decal-Lifting point 101014100020 Decal-Tie-down point 101014100021 Decal-Wheel load 500kg 101040103029 101014100013 Decal-Crush hazard 101040103013 Decal-Electrocution hazard Decal-High pressure hazard...
Page 78 DECALS/NAMEPLATES INSPECTION Description Part NO. Remarks 101012100029 Decal-Crush hazard Decal-Tipping hazard 101040103020 Attention line, 50mm wide 216060000004 Decal-Detachable handle support 101040103014 Decal-Annual inspection 101040103015 © Oct 2021 10-10 GTJZ0407SE Operation Manual...
Page 79: Decals/Nameplates(Kcs)
DECALS/NAMEPLATES INSPECTION DECALS/NAMEPLATES(KCS) 10 11 15 8 14 18 15 11 GTJZ0407SE Operation Manual 10-11 © Oct 2021...
Page 80 DECALS/NAMEPLATES INSPECTION Description Part NO. Remarks 101040103002 GTJZ0407SE decals KCS 101040103021 LOGO-SINOBOOM 101040103008 Decal-Brake release 101012100018 Decal-Crush hazard Decal-Electrical plug 101014100030 Decal-Lifting point 101014100020 Decal-Tie-down point 101014100021 Decal-Wheel load 500kg 101040103025 101014100013 Decal-Crush hazard 101012100005 Decal-Electrocution hazard Decal-High pressure hazard...
Page 81 DECALS/NAMEPLATES INSPECTION Description Part NO. Remarks 101012100029 Decal-Crush hazard Decal-Battery weight 66kg 101040103018 Attention line, 50mm wide 216060000004 GTJZ0407SE Operation Manual 10-13 © Oct 2021...
Page 82: Decals/Nameplates(Jp)
DECALS/NAMEPLATES INSPECTION DECALS/NAMEPLATES(JP) 10 11 15 11 © Oct 2021 10-14 GTJZ0407SE Operation Manual...
Page 83 DECALS/NAMEPLATES INSPECTION Description Part NO. Remarks 101040103001 GTJZ0407SE decals CE-S 101040103021 LOGO-SINOBOOM 101040103008 Decal-Brake release 101012100018 Decal-Crush hazard Decal-Electrical plug 101014100030 Decal-Lifting point 101014100020 Decal-Tie-down point 101014100021 Decal-Wheel load 500kg 101040103025 101014100013 Decal-Crush hazard 101012100005 Decal-Electrocution hazard Decal-High pressure hazard...
Page 84 DECALS/NAMEPLATES INSPECTION Description Part NO. Remarks 101012100029 Decal-Crush hazard Decal-Battery weight 66kg 101040103018 © Oct 2021 10-16 GTJZ0407SE Operation Manual...
Page 85: Decals/Nameplates(Ce-Pl)
DECALS/NAMEPLATES INSPECTION DECALS/NAMEPLATES(CE-PL) 10 11 15 8 14 18 15 11 GTJZ0407SE Operation Manual 10-17 © Oct 2021...
Page 86 DECALS/NAMEPLATES INSPECTION Description Part NO. Remarks 101040103003 GTJZ0407SE decals CE-PL 101040103021 LOGO-SINOBOOM 101040103008 Decal-Brake release 101012100018 Decal-Crush hazard Decal-Electrical plug 101014100030 Decal-Lifting point 101014100020 Decal-Tie-down point 101014100021 Decal-Wheel load 500kg 101040103027 101014100013 Decal-Crush hazard 101012100005 Decal-Electrocution hazard Decal-High pressure hazard...
Page 87 DECALS/NAMEPLATES INSPECTION Description Part NO. Remarks 101012100029 Decal-Crush hazard Decal-Battery weight 66kg 101040103018 Attention line, 50mm wide 216060000004 Q-LINE(Logo) 101058103000 GTJZ0407SE Operation Manual 10-19 © Oct 2021...
Page 88: Decals/Nameplates(As)
DECALS/NAMEPLATES INSPECTION DECALS/NAMEPLATES(AS) 15 8 7 14 18 15 11 © Oct 2021 10-20 GTJZ0407SE Operation Manual...
Page 89 DECALS/NAMEPLATES INSPECTION Description Part NO. Remarks 101040100018 GTJZ0407SE decals AS 101040103021 LOGO-SINOBOOM 101040103008 Decal-Brake release 101012100018 Decal-Crush hazard Decal-Electrical plug 101014100030 Decal-Lifting point 101014100020 Decal-Tie-down point 101014100021 Decal-Wheel load 500kg 101040103025 101014100013 Decal-Crush hazard 101055103019 Decal-Electrocution hazard Decal-High pressure hazard...
Page 90 DECALS/NAMEPLATES INSPECTION Description Part NO. Remarks 101012100029 Decal-Crush hazard Decal-Battery weight 66kg 101040103018 Attention line, 50mm wide 216060000004 Decal-Detachable handle support 101040103014 © Oct 2021 10-22 GTJZ0407SE Operation Manual...
Page 91: Decals/Nameplates(Csa)
DECALS/NAMEPLATES INSPECTION DECALS/NAMEPLATES(CSA) 15 8 7 14 18 15 11 GTJZ0407SE Operation Manual 10-23 © Oct 2021...
Page 92 Decal-Tipping hazard 101040100009 101040100005 Decal-Read manuals 215050000012 Blind rivet 4×8-ZnD GB/T 12618.2 Nameplate-CSA 101048103022 101014100032 Decal-Serial number Decal-Forklift pocket 101012100026 Decal-Emergency stop switch 101055103015 Decal-Main power switch 101055103018 Decal-Tipping hazard 101012100019 Decal-Tipping hazard 101012100008 © Oct 2021 10-24 GTJZ0407SE Operation Manual...
Page 93 DECALS/NAMEPLATES INSPECTION Description Part NO. Remarks 101012100029 Decal-Crush hazard Decal-Battery weight 66kg 101040103020 Attention line, 50mm wide 216060000004 Decal-Detachable handle support 101040103014 Decal-Annual inspection 101040103015 Decal-Operating instructions 101048103023 104011100021 Decal-Crush hazard GTJZ0407SE Operation Manual 10-25 © Oct 2021...
Page 95: Appendix 1: Symbols And Description
Collision hazards-Re- Electrocution hazards Electrocution hazards Keep a safe distance Tip-over hazards-Avoid lease brake on ramp on platform on the ground and from power lines uneven ground platform GTJZ0407SE Operation Manual © Oct 2021...
Page 96 Indoor use handle position and down platform Outdoor use The side force Electrocution hazards Wear protective cloth- Battery explosion ing and glasses hazard No smoking No smoking Only professional Improve point Lashing points maintenance © Oct 2021 GTJZ0407SE Operation Manual...
Page 97 DECALS/NAMEPLATES INSPECTION personnel can start the maintenance Tire to ground load Forklift fork position Platform carrying Carrying capacity of Hydraulic oil filler capacity fixed and extended platform Horn Tool or weight Fast/high speed Slow/low speed GTJZ0407SE Operation Manual © Oct 2021...
Page 99: Appendix 2: Prepare The Work Record Before Delivery
2. Use the table to record the results. After each section is complete, mark the appropriate box. 3. Record the inspection results. If any inspection results are "NO", the machine must be stopped, and re-in- spected after repair is completed and the box marked "inspection" must be checked. GTJZ0407SE Operation Manual © Oct 2021...
Page 101: Appendix 3: Repair & Inspection Report
B-1 Inspect Electric Wires B-2 Inspect Rim, Tire and Fasteners B-3 Inspect Battery B-4 Inspect Hydraulic Oil B-5 Inspect Hydraulic Tank Air Filter B-6 Inspect Manual Brake Release B-7 Inspect Emergency Lowering B-8 Inspect Braking Device GTJZ0407SE Operation Manual © Oct 2021...
Page 102 4. Record the inspection results. If any inspection results are "NO", the machine must be stopped and re- inspected after repair is completed and the box marked "REPAIRED" shall be checked. Select the appropriate inspection procedure based on the inspection type. © Oct 2021 GTJZ0407SE Operation Manual...
Page 103: Appendix 4: Major Modification And Repair Record
Modification/Repair” in the form will be “Good” and the machine can be used. If either inspection result is “NO”, the machine must be re-inspected after the repair is completed until the machine is in “Good” condition before continuing to use the machine. GTJZ0407SE Operation Manual © Oct 2021...
Page 104 Solution s Alw ays For B et t er A ccess Solution s Always for Better Access Solutions AS/N ZS Hunan Sinoboom Intelligent Equipment Co., Ltd. 长沙市宁乡高新技术产业园区金洲大道东 128 号 No.128, East Jinzhou Avenue, Ningxiang High-tech Industrial Park, Changsha, Hunan, China 市宁乡高新技术产业园区金洲大道东...

This manual is also suitable for:

Gtjz1330se

Sinoboom GTJZ0407SE Operation Manual

Quick Links

Need help?

Questions and answers

Related Manuals for Sinoboom GTJZ0407SE

Summary of Contents for Sinoboom GTJZ0407SE

This manual is also suitable for:

Table of Contents