Design Within Reach Aero Low Shelving Care Instructions

Design Within Reach Aero Low Shelving Care Instructions

Advertisement

Aero Low Shelving
Designed by Gabriel Tan for Design Within Reach
Customer Service:
1.800.944.2233 inside the U.S.
1.203.614.0600 outside the U.S.
1 | W W W . D W R . C O M | 1 . 8 0 0 . 9 4 4 . 2 2 3 3 | D E S I G N W I T H I N R E A C H S T U D I O S
Care Instructions
Regularly dust wood with a damp
soft cloth. Clean occasionally with
a soft cloth dampened with a
solution of mild detergent and
lukewarm water. Dry completely
with a clean towel.
Low Shelving

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Aero Low Shelving and is the answer not in the manual?

Questions and answers

Summary of Contents for Design Within Reach Aero Low Shelving

  • Page 1 Aero Low Shelving Designed by Gabriel Tan for Design Within Reach Customer Service: 1.800.944.2233 inside the U.S. 1.203.614.0600 outside the U.S. Care Instructions Regularly dust wood with a damp soft cloth. Clean occasionally with a soft cloth dampened with a solution of mild detergent and lukewarm water.
  • Page 2 Aero Low Shelving Designed by Gabriel Tan for Design Within Reach Hardware Checklist 4mm Allen wrench 25mm bolt Cone screw x 12 Wrench 12mm bolt (bottom shelf only) x 12 2 | W W W . D W R . C O M | 1 . 8 0 0 . 9 4 4 . 2 2 3 3 | D E S I G N W I T H I N R E A C H S T U D I O S...
  • Page 3 Aero Low Shelving Designed by Gabriel Tan for Design Within Reach Lay top shelf on a soft surface, top down or on its side. Align and attach middle shelf on previously installed Attach uprights using six cone screws as shown. Repeat with uprights using four 25mm bolts as shown.
  • Page 4 Aero Low Shelving Designed by Gabriel Tan for Design Within Reach Attach uprights to bottom of middle shelf using Align and attach bottom shelf to uprights installed in six cone screws as shown. previous step using four 25mm bolts as shown.
  • Page 5 Aero Low Shelving Designed by Gabriel Tan for Design Within Reach Attach leg bracket to bottom shelf using twelve 12mm bolts as shown. Loosen leveling legs slightly with wrench if necessary to ensure they can be Repeat with second leg bracket.

Table of Contents